used CEA for sale

Description: Unused, Balboa® control and operating system, 3 KW Heater, 54 stainless steel adjustable jets, Water pumps, strong 3HP, for the hydromassage, Separate circulation pump, Disinfection of the water by UV or ozonator, Multi-Filtration system, nicely concealed behind built-in valve, Beautiful ergonomic White-Silver executed tub, Thermo tub insulation , Entire insulation all around and floor, Sealed and thermo-insulating ABS bottom bottom plate, Water level LEDs all around on water level adjustable in color, Underwater LED lighting (adjustable in color and various light programs), 3 Head cushions (one of which is adjustable in height), Music via Bluetooth and 2 stereo speakers, The new modern horizontal panels, Led exterior illuminated corners, Illuminated 'frosted look' LED cup holders, Extensive Led lighting in bath included: Matching beautiful sleek spa steps in maintenance-fr ...

Description: Rated voltage: 230 V~50 Hz Power: 220W Rotation speed: 7500 rpm Sanding disc size: 100 x 10 x 3.2 mm Replaceable abrasive disc Built-in grinding depth limiter Chain tensioner and sharpening scale The vice can be rotated right/left by 35° weight approx.: 3 kg, Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm

Description: Rated voltage: 230 V~50 Hz Power: 220W Rotation speed: 7500 rpm Sanding disc size: 100 x 10 x 3.2 mm Replaceable abrasive disc Built-in grinding depth limiter Chain tensioner and sharpening scale The vice can be rotated right/left by 35° weight approx.: 3 kg, Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm

Description: Rated voltage: 230 V~50 Hz Power: 220W Rotation speed: 7500 rpm Sanding disc size: 100 x 10 x 3.2 mm Replaceable abrasive disc Built-in grinding depth limiter Chain tensioner and sharpening scale The vice can be rotated right/left by 35° weight approx.: 3 kg, Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm

Disinfectant wash basin, hand wash basin, wash basin -Premo Aquadator: -Multifunctional: cleaning station -With MISCEA sensor fitting: with integrated soap and disinfection dispenser -With hygiene unit: -Stainless steel: sink -Basin height: 920 mm -Dimensions: 700/670/H1565 mm -Weight: 98 kg

Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Fiat forklift, model: E/3 17.5N, capacity: 1750 kg, weight: 2220 kg, fork dimensions: 1000 mm x 120 mm, total dimensions: 2900 mm x 1060 mm x 2200 mm. With CEAC charger.

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 140 mm cutting capacity - round: 240 bei 45° mm work height max.: 945 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 200 bei 45° mm total power requirement: 3,0 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2650 x 2040 x 2050 mm Very robust machine framework composes of castings from grey cast iron andensures vibration absorption. In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy turntable on both sides in massive housing fitted with pre-stressing tapered roller bearings. Modern concept of the band saw arm allows for large cutting ranges in both upright and angular cutting. Massive arm turning syst ...

thickness of jaw: 220 mm max. clamping width: ca. 275 mm high of jaw: 63 mm weight: ca. 70 kg New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 150 / 160 / 200 mm max. clamping width: 105 / 138 / 275 mm ca. high of jaw: 46 / 63 mm New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

size of profile - max.: 150 mm Number of drilling agregates: 1 Stk. bore diameter: 35 mm quill stroke: 140 mm spindle taper: MK 4 column diameter: 120 mm throat: 300 mm distance spindlenose - table min./max.: 50 / 600 mm spindle turning speed range: 14 / 45 - 1650 U/min impact length: 3000 mm base plate: 420 x 420 mm Max. speed ot the feeder: 200 mm/sec. positioning accuracy: auf 3 m +/- 0,2 mm air consumption: 6 bar boring motor: 1,5 kW Carrying capacity feeder: 45 kg Control: weight of the machine ca.: 500 kg dimensions of the machine ca.: ca. 2,5 x 0,7 x 2 m CE signed: Condition: ready for operation: Video(s) available on our website.: Electric 400 Volt: Cooling equipment (Micro-Cooler): Luft - Öl Protection made in plastic: Controlled SERIES DRILLING MACHINE used very little with 3 automatic spindel feeds in conjunction with the automatic speedy feed system suitable for pipe a ...

: neu : 2023 : 7293 : prompt, Zwischenverkauf v : Türkei : 9000 € : 1 : 1 : 100 to : 300 mm : 1070 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2430 mm : 1500 kg horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 47270 € : 959.58 € : 35 mm : MK 4 : 390 mm : 94- 2.225 (16) 50 Hz 113 U/min : M35 : 1660 mm : 1510 mm : 2600 mm : 910 kg : 180 mm : 190 - 650 mm : 1310 mm : 125 mm : 400 x 420 mm : 0,10 - 0,18 - 0,24 (3) mm/min : 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 15150 € : 310.58 € : 40 mm : MK 4 : 38 - 1.270 (9) U/min : M32 : 550 mm : 950 mm : 2363 mm : 640 kg : 0,10 - 0,40 (4) mm/U ERLO(MADE IN SPAIN) FOR MANUFACTURING USE automatic feed gear drive fixed machine table displaceable and rotatable drill head tiltable turntable front wheel for sensitive fine feed coolant equipment lighting Options: Manual tapping system € 785,-- (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit  ...

diameter: -- mm workpiece length: -- mm work piece width: 15 mm range of angles: 15-50 ° plate thickness: 6-40 mm total power requirement: 1,5 kW Feed speed: 3,5 m/min. dimensions: 530 x 395 x 860 mm weight of the machine ca.: 94 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from a ...

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC CLASSIC 50 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - New machine from our demonstration room, Bj. 2022 Pos. 1: Classic 50 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW.  ...

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 450 kg range L-W-H: 1100x800x1500 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW range L-W-H: 900 x 600 x 1000 mm weight: 470 kg connected load: 400/50 V/Hz Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 495 kg range L-W-H: 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 95 mm Shaft diameter: 30 mm Shaft revolutions: 7 U/min roll diameter: 132 mm Drive: 0,75 kW weight: 220 kg range L-W-H: 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 80 mm roll diameter: 260 mm : 7 U/min : 170 mm : 27 kN : 160 mm : 450 mm total power requirement: 3,7 kW dimensions: 980x1430x1600 mm weight: 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x850x1350 mm weight: 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

description: Limited opportunity! For sale are approx. 100 pcs. LED floodlights. Perfectly suitable for production halls / warehouses. The lamps were purchased approx. 2016 and have run approx. 35.000h since then. The manufacturer has stated that the lamps have run 80.000h, before the lighting effect can decrease. The new price was at that time after discount blow 400 / pc plus installation. The reason for the high price is also the advantage of a component system. Unlike many other systems, this one is replaceable / repairable. LED/system power 120/135W; luminous flux 14.400 lumen; beam angle 120°; input voltage 100-240VAC 50/60Hz. All information without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhau ...

There are three Push-Pull Attachments Meyer 1-2503 N, one Implement/ Box Clamp Cascade 20D-CC-X07J and one Multiple-Pallet Tine Adjuster Durwen DPK 30B available, all attachments are only conditionally serviceable as they have not been in use for some time, all items would need to be checked.

Z-axis: 300mm, rotational speed: 0-10/min or variable, electrode diameter: 0-6mm, number of tools: 1, max. tool length: 300mm, connected load: 2.5kVA, weight: 100kg, operating hours: 250h, with various electrode holders and guides, cooling water pump, on-site inspection is possible.

Precision air chuck Ø240mm (Type 9-500-6QC) Technology: APC Repeatability approx. 0.0015 Jaw stroke 12mm concentricity: approx. 0.005 mm base jaw DRM 134-182mm - as new unused air chuck Equipment: - Jaw Ø 174 - 182mm Use of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.

CONTROLS   CNC controls SIEMENS TP 900 ELECTRICAL SPECIFICATIONS   total power consumption: 175 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4200 mm   space requirements -front/back-: 2550 mm   total height: 3000 mm Condition NEW 150h was only the IBN and acceptanceaqueous solution 3750 litersRotating basket (horizontal)washing baskets 640x460x400mm - 3 steps cleaningFilter 40/20/10 µmCleaning processes- B1 Ultrasonic cleaning- B1 Flow-through cleaning- B1 Spray cleaning- B2 Injection flow-through cleaning- B2 Spray rinsing- B3 Flushing deionized water- B3 Blow-out and dripping- B3 Hot air drying

Overview This filling line was part of a whole brewery and was assembled in 2015 by German manufacturer Hormes. The line will be dismantled soon. The bottling line recently ran at 15,000 bph with 0.33L glass bottles. Components Glass Depalletizer | Hormes Set up for 1 pallet size, new glass pallet: 1000 mm x 1200 mm The chain hoist is driven by an electric motor. The traverse has a length of approx. 4,500 mm Fully automatic rinser | Hormes Capacity: up to 15,000 bph Number of spray nozzles at least 36 Equipped for 1 bottle type The inside of the bottles is sprayed with fresh water Spraying with fresh water approx. 1.5 sec., draining approx. 5 sec. Inlet auger, star wheels and guides are easily replaceable Machine cladding made entirely of stainless steel Electrical connected load: 230/400V, 50Hz, approx. 4 kW. With new S7 control system Automatic bottle filling and capping machine | KHS  ...

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10 800 cph represents indeed a reliable and efficient solution for industrial bottling operations Equipped with specialized and high quality equipment this line is meticulously designed to maximize productivity and ensure in fact optimal results CFT Empty Can Twist Rinser Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans Moreover with its dual can rinser system and spare parts sets for 0 35L and 0 47L aluminum cans it ensures flexible operation tailored to specific production needs Additionally the rinse process guarantees pristine can surfaces vital for maintaining product integrity CFT 20 Valve Can Filler Seamer of the CFT Canning Line The 2013 model RS20 CFT 20 valve can filler with seamer ensures precise and rapid filling o ...

Ripper tooth - ripper tooth with various mounts suitable for Martin, Geel, Winkelbauer, Baumaschinentechnik, Lehnhoff, Verachtert, Miller, Oilquick and many more. for excavators from 1t to 35t Demolition tooth made of HARDOX400 with replaceable tooth, remaining parts made of S355I2+N steel listed price is for the 1-2t excavator version

Caliper CSE INOX (stainless steel) for shrinkage Shrinkage measure in model making or mold making Shrink caliper Measuring range in millimeters: 0-300mm Measuring leg length: 100 mm Internal measuring attachments: 10 mm Tip legs: 45 mm - Scale with 0% / 1.0% / 1.25% / 1.5% - Vernier reading - precise scaling- Locking screw - Tearing tips replaceable - INOX stainless good condition 4 pieces available, price indication per piece; used

Nozzle cleaning machine, torch cleaning station Gas nozzle cleaning device for MIG MAG robot welding systems BINZEL type BRS Ident. No.: 8310260 Device No.: 4212 Year of construction: 1998 Welding nozzles Dirt cutter for robots with arc welding machine Operating voltage: 24 volts DC/DC Cutter diameter inside: 8 mm Cutter diameter outside: 12 mm Stroke movement: 50 mm Pneumatics Compressed air connection: 6 to 8 bar - Milling drive via air motor ( Desoutter) - pneumatic cutter infeed movement (lifting movement) - replaceable cleaning cutter - gas nozzle fixation via pneumatic prism clamp Space requirements: L x W x H 240 x 230 x 380 mm Net weight: 8 kg good condition The milling machine for single-wire welding torches comes from a robot welding cell and worked without any problems until dismantling.; used

Pictogram disc, escape route sign, 1-sided EATON CEAG GuideLed 30m PL ISO 7010 Article number: 40071354543 max. 28 V DC Pictogram: 304 x 154 mm Cable length: approx. 350 mm ( solid ) New ! Dimensions: 326 x 184 x 12 mm

Safety and escape sign light, single battery light CEAG COOPER Safety SV EURO 1-3/D bulbs: T16 Power: 8 W Voltage range: 230 V AC, 50 Hz Battery: 3,3,6 V DC, 4.0 Ah, nickel cadmium IP41 without pictogram used, tested ! Dimensions: 338 x 100 x 68 mm

Pictogram disc, escape route sign, 1-sided EATON CEAG GuideLed 30m PL ISO 7010 Article number: 40071354530 max. 28 V DC New ! Dimensions ( pictogram disc ): 325 x 185 x 15 mm Dimensions ( packaging ): 390 x 325 x 20 mm

Safety and escape sign luminaire, ceiling-mounted CEAG COOPER Safety 79021 CG-S PM 400 71 351 233 bulbs: T26 < br />Power: 18 W Voltage: 230 V AC, 50 / 60 Hz / 220 V DC IP40 3x Pictogram disc 9 PR DIN 4844 400 71 351 801 without bulb ! New ! Dimensions ( luminaire without ceiling bracket ): 640 x 800 x 340 mm Dimensions ( packaging ): 660 x 100 x 360 mm

Circuit Switching Modules, Emergency Lighting Systems Circuit Switching CEAG SKU CG-S 1 x 6 A 40071347345 Self-consumption: 3.85 W Continuous current: 6 A per circuit one circuit Switching time AC/DC: approx. 450 ms New ! Dimensions: 170 x 155 x 55 mm

Centrifugal pump, single-stage LOWARA CEA120/5/A 104480040 Q: 60 - 160 l/min H: 28,2 - 17.3 m Hmin: 17.3 m Motor: 1.32 KW 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 Suction Side: 1 1/4 ( inch) ) Print Side: 1 ( inch ) Pump material: stainless steel control box is damaged ! used, tested ! Dimensions (pump): 335 x 215 x 225 mm

electronic ballast, digital electronic ballast CEAG ECG d 165 ex fluorescent lamp: TLX65W 220 - 250 V AC 50 / 60 Hz Ex-proof ! used, checked ! Dimensions: 270 x 100 x 50 mm

Escape sign light, escape route light, escape route light ABB, CEAG RZ/SL5001/220AC bulbs: 8 W LL 230 V AC 50 Hz IP 20 used, tested ! Dimensions: 355 x 100 x 80 mm

Ex-e Command Controller, Control and Signaling Device CEAG, EATON Crouse Hinds GHG 411 83 - Polyamide GHG4118300R0001 2 x Push Button 1 x Indicator Light explosion-proof New ! Dimensions ( Command generator ): 200 x 85 x 95 mm Dimensions ( packaging ): 220 x 120 x 120 mm

Limit switch ABB CEAG GHG 391 0303 VO ( GHG3910303VO ) EX 3935/3 PH 6 A 380 V AC explosion-proof ! New ! Dimensions (packaging): 160 x 130 x 100 mm