used CEA for sale

Semi-automatic dough dividing and warping machine Bread roll press Model: 4/30 sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates replaceable partial disc / part head manual sharing mechanical rounding Dough ring coated with easy klick Subrange 40 to 120 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

CNC circular saw KASTO variospeed SC 14 – used - : Price from location: 159.500.-€ (net), plus dismantling etc.! Manufacturer: KASTO Maschinenbau GmbH & Co.KG, 77855 Achern/Germany Year of construction: 2006 Technical data of the system: Dimensions of sawing material max. Ø tubes 150mm max. Ø piston rods 110mm Extraction device from Ringler: Power: 4.0 kW Voltage / Frequency 400V / 50Hz max. negative pressure 32 kPa max. air flow rate 520m³/h Sound level 62 dB(A) Protection class IP 54 System dimensions saw: Height approx. 2,200 mm Length approx. 3,900 mm Width (without chip conveyor) approx. 2,000 mm Weight approx. 4000 kg Connection. / Pre-safe. 36 KW / 100 A Former original price: 300.000,- EUR Available: now Condition: good - very good Location: Hamburg area Description of the plant: Machine body in welded construction. The machine stand, ca ...

Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1

Reducer Concentric AGRU/TRACEABILITY 90/75 SDR17

CNC controller: Heidenhain iTNC530 Axes X-axis travel mm: 3.000 Y-axis travel mm: 1.200 Z-axis travel mm: 2.000 Rapid traverse m/min: 25 Milling/turning table nc: Table dimensions mm: 1.400x1.600 Max. workpiece weight kg: 12.000 Automatic Milling Head in diagonal design, rotable 2,5/2,5 degrees and 4.000 rpm speed. Spindle Spindle speed rpm: 4.000 Spindle drive power kW: 36 Spindle torque Nm: 7.750 Cooling Tank capacity: 500 High-pressure bar: 20 Tool system Tool holder: HV Tool magazine slots: 40 Max. Tool Diameter 125 With free neighboring places mm: 250 Max. Tool Length mm: 380 Max tool weight kg: 20 Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply blowing air through spindle center choiceable via M-function NC swivel rotary table Workarea light Foot switch for chuck or collet system Internal coolant supply Rated power kV ...

Laboratory refrigerator Liebherr LCexv 4010, combination device, explosion-proof interior in accordance with the ATEX directive for the storage of explosive and highly flammable substances. Electronic temperature control with 0.1°C temperature display to the degree enables the most accurate temperature settings Built-in data storage with AlarmLog Two independent regulators and two compressors for optimum functionality and rapid cooling rate after door openings 1-point calibration SmartMonitoring Ready via RS485 interface potential-free alarm contact for connection to central building control centers Access for temperature sensor (Ø 10 mm) Practical drawers (in the freezer compartment) with transparent front for a clear view of the stored goods The doors are self-closing for convenient operation, the door hinge can be changed and the clamp seals are replaceable

Dimensions (HxWxD) 1290 x 1345 x 700 mm Temperature Range +2 to +10 °C Serving area 540 mm wide Display area internally illuminated Fits 10 x GN 1/4 - 150 mm deep gatronorm pans (not included) Doors: 2, Weight 137 KG Refrigerant R134A Maximum Ambient temperature 43°C High grade AISI 304 stainless steel interior and exterior One 1/1 gastronorm shelf supplied per door - 2 shelves in total Internal corners rounded for easy cleaning Adjustable legs Replaceable gaskets Pan Capacity: 10 x 1/4 GN Pans Accepts gastronorm pans up to 150mm deep (not included) Fan assisted cooling Automatic defrost Epoxy coated evaporator KIOUR controller with temp display 13 amp supply Electronic controller fitted Right handed motors Ex Works Price does not include VAT. Inspection of the machine will be scheduled at least 24 hrs in advance. We speak English. Wir sprechen Deutsch. (+ ...

Powder fire make: CEAG Type: PG50-ABC Content: 50 kg There are a total of 4 pcs

Track gauge: 980 mm Support height: 430 mm Drive: 0.37 kW - reinforced design - with tipping stool and circeaching roller chain for model - with a hydr. tilting and movable trough smelter provided with chains

Codimag viva 340 waterless offset 8 colors Electrical equipment and control panel. Longitudinal cutting device with 4 knives. Plate bending device for waterless plates Base with register trolley with flexographic printing unit for varnishing including varnish pump and anilox roller (angle 60°, grid width 80L/cm, volume 9 cm³/m²) Magnetic cylinder for Flexowerk Stork screen printing units each with base and register carriage including ink pump and automatic ink level control UV drying 8 statons Make IST, type M40-8x1-MBS-G-Co-CMK-SLC4 printing units à 120 Watt 4 printing units each 160 Wat (printing unit, varnishing unit, 2xscreen printing) Air-cooled spotlight unit including CMK reflector, telescopic slide and SLC stepless power control Hot foil stamping unit with servo drive incl. -1Hot foil stamper -Foil saving circuit -Special base with register trolley -electronic e ...

automatic chamfering and beveling machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic switch-off in case of repeatable chamfer lengths - Colour touchscreen control panel - max. spindle speed 3,000 rpm - Rod diameter 8-80 mm - hydraulic 3-jaw chuck - Cutting head suitable for all material sizes - quickly replaceable ISO inserts - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - 4 kW motor - High-precision Mitsubishi servo drive - Ball screw with high thrust capacity - Large machine door - Internal, powerful LED work light - Shavings collection container with external shavings basket - Lifting points for pallet trucks - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified

Spindle diameter 30mm Spindle working height 150 mm replaceable spindle Spindle lock Table top adjustable up/down Original cast iron guide 6 kinds of speeds + right/left 2800/5600/4500/9000/6000/12000 rpm Tabletop dimensions 1100x890mm Motor approx. 6kW Brake Dimensions Length/Width/Height 1100x900x1060mm Weight 675 kg The machine comes from the repair carpentry workshop of a brewery.

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Rope grab bucket older design but little used good condition. Bucket extension 1 x 4 replaceable fence 1 x 3 replaceable fence little snuffed. Bucket width: approx. 700 mm Shovel opening: approx. 1.8 m Double pulleys at the bottom and top. Total height: approx. 2.8 m

XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction.  ...

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Engine power of the saw blade 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balancing and durability. Shock-absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. Carbide circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system by means of new ball bearings with double dust protection and automatic lubrication system. CE-comp ...

Cofely Quantum X060-S2CL-LL chiller 600 kW All Quantum Air models are characterized by maximum efficiency, maximum cooling capacity, convenient control and excellent serviceability. Features of the Quantum Series: Turbo liquid chiller for applications from 250kW to 3MW Oil-free system High operational reliability Low maintenance, low vibration and quiet operation Multi-compressor design Precise control of the recooling process through variable capacity control Highest energy efficiency with excellent performance values (COP) Nominal power: 600 kW Number of compressors : 2 max. heat transfer fluid outlet: 38°C - 50°C min. refrigerant outlet : –5°C - 4°C max. current consumption: 275 A Refrigerant: R134a Capacity: 120kg Refrigerant: Water Refrigerant volume: 71.5 m³/h According to ENGIE, the Quantum chillers can be easily converted to the 513A refriger ...

Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...

Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fou ...

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Seydelmann bowl cutter K 60 AC-8, year manufacture 2009, 60 liters bowl cutter, almost completely made of solid stainless steel, operation via knee lever switches, separate digital control COMMAND 1000 K in stainless housing, noise absorbing cover of special polycarbonate, central point of lubrication for knife shaft, balanceable and exchangeable knife head, 6 steplessly pre-programmable forward knife speeds, 2 reverse mixing speeds, 2 separate bowl speeds, separate control box of stainless steel with built-in main-switch, knife shaft brake electrically operated

1 Slicer with checkweigher and removal belt Model: Mega-Slicer Type: SL 490 Manufacturer: Dixie Union, Germany Machine number: 490.1229 Power: up to 600 cuts/min., adjustable 60 different programs choiceable Application: Cheese and sausage cutting Disc thickness: 0.5... 20 mm, adjustable Piece thickness: 5... 50 mm, adjustable Electrical connection: 380 V, 9,0 KW Dimensions: 2,4 x 1,3 x 2,4 m 1 Checkweigher Manufacturer: Boekels, Germany Type: EWK 436 1 Removal belt Technical condition: used in excellent operating condition

1 High performance - cutting machine with checkweigher and removal belt Model: Mega-Slicer Type: SL 490 Manufacturer: Dixie Union, Germany Machine number: 490.1229 Power: up to 600 cuts/min., adjustable 60 different programs choiceable Application: Cheese and sausage cutting Disc thickness: 0.5... 20 mm, adjustable Piece thickness: 5... 50 mm, adjustable Electrical connection: 380 V, 9,0 KW 1 Checkweigher Manufacturer: Boekels, Germany Type: EWK 436 1 Removal belt Technical condition: used in excellent operating condition

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

· Rotary Die Cutting Machine with Magnetic Cylinder · Easily replaceable die · Automatic feeding with double sheet detection and automatic correction · Double magnetic cylinder with anti-splitting coating · Indicated for slit and semi-cutting in adhesives, labels, cardboard, etc. · High pile suction feeder · Touch screen · Machine with automatic stripping · Front registration TECHNICAL SPECIFICATIONS · Max sheet size: 480 X 740 mm · Min sheet size: 240 X 280 mm · Max final product size: 456 X 720 mm · Min final product size: 50 X 80 mm · Min distance (depends on the material): 5 - 8 mm · Max die size: 480 X 750 mm · Min die size: 160 X 100 mm · Die height: 1 mm · Die cutting accuracy: ± 0,1mm · Material thickness (die cutting): 0,2 - 0,5 mm · Material thickness (max creasing): 0,4 mm · Feeder stack height: 500 mm · Max speed (depends on t ...

New (secondhand) pumps Delivery: up to 31 m3/h. Head: up to 62 m. Power supply: three-phase 50 and 60 Hz. Power: 0.37 kW to 3 kW. Maximum operating pressure: 8 bar. Temperature of pumped liquid: -10°C to +85°C (CEA-CA) / -10°C to +110°C (CEA-V CA-V with elastomers in FPM). Insulation class: F. Protection: IP55. Pump body: Stainless steel. Impeller: Stainless steel. Diffuser: Stainless steel. Seal housing: Stainless steel. Adapter: Aluminium. Mechanical seal: Ceramic/Carbon/NBR. Fill and drain plugs: Stainless steel.

Second-hand machine - Year of construction 2005 Cleaned & functionally tested expected to be available from mid-September 2023 = only 2622 operating hours within approx. 18 years (as of 04.07.2023) This corresponds to a work performance - of only approx. 145 working hours per year or approx. 12 working hours per month! - with 3 hours of operation: less than 900 working days or 3 years in total = In the 4000 TR/G-S version, the Mini Rex has two different large stamping strips, whereby round-knitted with a machine, as well as angular/cushion-shaped dough pieces can be made. Features of the Mini Rex 4000 head machine: - Hourly output: 2,040 - 3,960 pcs at 17 - 33 strokes / min, infinitely variable - Built in 2005 - Extended product range with 2 weighing punches (round & square) - Best effective results via infinitely adjustable active eccentric - with dough hopper and ...

New machine BÄKO SPECIAL OFFER with 3 year warranty BÄKO Item No. 821209 Benefits: + Fully automatic + unbeatable price-performance ratio + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + quickly replaceable, coated knife head + with one machine, up to 4 different knife heads can be used + extremely wide weight range (16 gr - 250 gr round worked possible!) + uniform division of the dough, excellent round ingesity of the dough pieces + Act shutdown at the push of a button + ergonomic knife cleaning position (head swivelable 90 degrees forward) + Act switch-off, pressing time and duration of action programmable + digital display, 10 programs can be saved + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES accessories: + 3 impact plates included SPECIAL acc ...

The CEA ATM 18/18 was conceived to be introduced in the modern Pharmaceutical production line. It is placed after the filling and sterilization line, before the labeling and packaging line. The ampoules and/or vials are loaded manually on the loading plane of the ATM machine 18/18 by trays. The output of the rejected and approved ampoules and/or vials are respectively collected in separate trays. Formats: 1-2-5 ml Technical characteristics: • Dimension ampoules and bottles: Diameter Ø from 9 to 18 mm total height up to 100 mm • Mechanical speed: 18,000 vials/hour max. for 1 – 2 ml ampoule • Rotation speed: continuously adjustable from 500 to 3000 rpm • Power supply: 230V ± 10% 50/60 Hz 1Ph • The Client must guarantee a voltage fluctuation of no more than 10% • Absorbed power: 5 Kw • Loading/unloading plane height: 900 mm (adjustable ± 25 mm) • Dimens ...

:::SPECIFICATIONS::: Technical data: Worktable dimensions 460 x 210 Vertical travel 350 mm X 200 Y100 RPM 200 electrode tube diameter 0,3 - 3 mm Electrode length 400 mm :::D IMENSIONS AND WEIGHT::: Length: 870mm Width: 950mm Height: 1950mm Weight: 450Kg

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...

- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...

Automatic labeling train from the manufacturer BIZERBA, GLE model, Automatic equipment with static weighing for weight labeling and fixed prices (WITHOUT SCALE) High quality equipment and great performance in terms of speed and reliability. Allows you to label products with weight information and fixed prices. Ideal for top labeling. OUTSTANDING FEATURES   Possibility to label fixed weight-amount. Order Management Tagging totals Generic traceability on label Adapted to comply with EU regulation 1169/2011 regarding food information. Barcodes: EAN-8, EAN-13, EAN-128, CODE 128, ITF-14, GS1 Datamatrix and GS1 Databar (up to 4 codes per label). WEIGHING TYPE Static, with tape width 300 x length 430 mm. LABELLING SYSTEM TYPE OF PRINTING Direct thermal.- PRINT HEAD. Long-lasting head and resolution 8 dots/mm APPLICATION OF LABELS Applica ...

Catalogue number 4339 - replaceable spindle - spindle adjustable up/down hydraulically and pneumatically - milling apparatus adjustable at an angle - vertical spindle stroke 10cm - max distance from the table top to the spindle 18cm - table top dimensions 90x76cm - dimensions of the table top with extension and extension 159x117cm - cast iron worktop - top adjustable up / down - 4kW motor - 2 types of spindle speed 10000, 20000 rpm - with feed - smooth regulation of feed speed - diameter of the extraction connection 8cm Dimensions: - length 159cm - width 198cm - height 170cm - weight 975kg - used milling machine - very good condition - unpainted Net price: 5500 PLN Net price: 1183 EUR Net price calculated according to the exchange rate of 4,65 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Butterpack machine, margarine packaging machine, packing machine Stations: Swivel cell Paper fending and folding equipment With photo cells pressure centering Date stamp station with thermal pressure Volumetric dosage with trough Final folding station Parcel launch station Exhauting tape 1,000 mm long Format: 100 x 75 x 35 mm = 250 size or other format for additional price Products: Butter or similar products Dosage: Volumetrical 100 â 250 grams, infinitely adjustable Dosage accuracy: +/-1% Unwrap material: Parchment, concealed aluminium foil Date: Dye-stamp print Power: 40 packages/min.

- replaceable stainless steel sifties for adjusting the grinding unit - food-grade - self-sufficient use or mounted directly on pre-basket presses nominal power up to 650 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A La 496 mm width 434 mm He 885 mm He he with frame 1360 mm Hehe Assumption 1360 mm Weight 28 kg weight (without / with frame) 28 / 42 kg material 1.4301 / AISI 304 Hoehe mash release 690 mm Supplied cutter 8mm ; New machine - best condition

Seydelmann Kutter K 40 Ultra, Seydelmann K 40 U, 40 liter bowl made of stainless steel, largely solid stainless steel, operation via toggle lever switch, separate digital display, noise protection cover made of transparent special plastic, central lubrication point for knife shaft, balanced, replaceable knife head with new knives of your choice, 2 knife speeds, 2 bowl speeds, 2 mixing gears forward, DGA control, 6-knife head, 3-knife head optional for an extra charge available, operating voltage 400 V / 50 Hz

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...