Specifications / Technical Data S-400
Fraes machine /
engraving machine
With the
High-Z CNC-Fraes.- and engraving machine you acquire an all-round
talent in TUeV-certified quality (EMC). Whether you want to clamp
complex parts on a groove table or, or put factory tins in a high vice
(the machine is on a frame construction, is driven in X via 2 motors
and thus allows to be placed completely over a part to be
machined).
or simply want to do engraving or
drilling then they simply work on a flat base, on which they then
attach e.g. an MDF plate, which they once overfrave plan and are then
able to work up to approx. +/-0,02mm exactly in depth.
All machines are supplied with coloured energy chains
on all axes due to improved cable guidance. Furthermore, all machines
are protected with a double-secured emergency exit button. Another is
located directly at the controller.
Basic
equipment of all high-Z CNC fraes:
software
ConstruCAM-3D ( from S-720 and S-400/T ) including
To use
the CADCAM ConstruCam software to the full extent, Upgrade the WIN
PCNC fraes software from Version Economy
Fuus
reference switches and NOTAUS buttons as well as 22mm thick linear
guides and individually adapted spindle nuts.
---------------------------------------------------------
------- ----------------
equipment / product data
of the CNC-Fraese:
oDrive : 4 powerful brand stepper
motors with 1600 steps/ revolution (control 1/8 step)
o2
motors ! for consistent pull and pressure strains when fraesing on the
X-axis (no stoering belt)
o pushing long materials possible,
since no belt drive is in the way at the end of the X axis !
oGuideen X and Y axis 22mm ! Z-axis 16mm, all ground and
61hrc top-flae-hared
oOn both sides ball-bearing trapezoidal
threaded C5344965 spindles Tr.12x3 mm C5344965 incline, nuts adapted
to spindles in a basic way
oTravel speed max. approx. 3000
mm/min
oTechnical application 0.000187 mm ( 1/8 step )
oReverse play maximum approx. +/- 30 microns ( 0.03mm )
oclamping flat 730 x 400 mm
oTravels: X=400 mm; Y=300 mm;
Z= 110 mm
oContactless reed sensors / reference switches /
limit switches on all axes
oDouble secured emergency trigger
oColored energy chains for clean cable guide
oTotal
mass with motors : LxWxH=ca.730x520x500mm
oFraesmotor holder
Euroneck 43mm
oinkl.
Item condition: New. Delivered pre-assembled and tested!
the ce-compliant commissioning of our CNC machines requires
the installation of the protective enclosure and the suction
nozzle.
seller offer No. resale 67805459
Germany
47608 Geldern
