Specifications / Technical Data S-720
CNC-Fraesmaschine
With the High-Z CNC-Fraes.- and Engraving
Machine you acquire an all-round talent in TUeV-certified Quality
(EMV). Whether you want to clamp complex parts on a groove table or,
or put factory tins in a high vice (the machine is on a frame
construction, is driven in X via 2 motors and thus allows to be placed
completely over a part to be machined).
or simply
want to do engraving or drilling then they simply work on a flat base,
on which they then attach e.g. an MDF plate, which they once overfrave
plan and are then able to work up to approx. +-0.02mm exactly in
depth.
All machines are supplied with coloured
energy chains on all axes due to improved cable guidance. Furthermore,
all machines are protected with a double-secured emergency exit
button. Another is located directly at the controller.
Basic equipment of all high-Z CNC
fraesmachines:
software ConstruCAM-3D, (from S-720
and S-400/T ) including
To use the CADCAM ConstruCam
software to the full extent, you need the Win PCNC fraessoftware from
version Economy
reference switches and NOTAUS
buttons and-------------------------------
22mm thick
-------------------------------------------------
equipment / Product data:
oDrive: 4
powerful brand stepper motors with 1600 steps/rotation (control 1/8
step)
o2 motors ! for consistent tension and pressure strains
when fraesing on the X-axis (no stoering belt)
opushing long
materials possible, since no belt drive is in the way at the end of
the X axis !
oFuehrungen X and Y axis 22mm ! Z-axis 16mm, all
ground and 61hrc top-flax-hared C5344965
oOn-side
ball-bearing C5344965 trapezoidal threaded spindles Tr.12x3 mm
incline, nuts adapted to spindles in a manner
oTravel speed
max. 2500 mm/min
oTechnical winding 0.000187 mm ( 1/8
step)
reverse play maximum. +/- 30 microns ( 0.03mm )
o clamping area 1050 x 520 mm
otravel distances: X=720
mm; Y=420 mm; Z= 110 mm
oContactless reed sensors / reference
switches / limit switches on all axes
oDouble secured
emergency trigger
oEnergy chains for clean cable feeding
oTotal mass with motors : L x W x H=ca.1070 x 690 x 500mm
oFraesmotor holder Euroneck 43mm
the ce-compliant commissioning of our CNC machines requires
the installation of the protective enclosure and the suction
nozzle.
seller offer No. resale 67805422
Germany
47608 Geldern
