모델

모델
(생산자: OSTAS)

 
범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2570 x 25/30
품목 아니오.: 156876945
새로운 기능: 2021
새로운

sheet width: 2500 mm plate thickness: 30 mm pre-bending: 25 mn number of rolls: 4 Walzen diameter of upper rolls: 400 mm roll diam. bottom roll: 300 mm speed: 1,5 - 5 m/min total power requirement: 38,5 kW weight of the machine ca.: 18,3 t dimensions of the machine ca.: 5,45 x 2,35 x 2,45 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 3070 x 4/6
품목 아니오.: 157046164
새로운 기능: 2021
새로운

sheet width: 3000 mm plate thickness: 6 mm pre-bending: 4 mn number of rolls: 4 Walzen diameter of upper rolls: 220 mm roll diam. bottom roll: 180 mm speed: 5,0 m/min total power requirement: 7,0 kW weight of the machine ca.: 6,2 t dimensions of the machine ca.: 5,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORGM 1050 x 6
품목 아니오.: 156640925
새로운 기능: 2021
새로운

sheet width: 1050 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: 1,35 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2070 x 45/50
품목 아니오.: 157046174
새로운 기능: 2021
새로운

sheet width: 2000 mm plate thickness: 50 mm pre-bending: 45 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 450 mm speed: 1 - 4 m/min total power requirement: 66 kW weight of the machine ca.: 40,00 t dimensions of the machine ca.: 5,75 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2570 x 16/20
품목 아니오.: 156640933
새로운 기능: 2021
새로운

sheet width: 2500 mm plate thickness: 20 mm pre-bending: 16 mn number of rolls: 4 Walzen diameter of upper rolls: 350 mm roll diam. bottom roll: 260 mm speed: 1,5 - 5 m/min total power requirement: 23,5 kW weight of the machine ca.: 13,3 t dimensions of the machine ca.: 5,45 x 1,95 x 2,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS SMR-S 2570 x 6/7
품목 아니오.: 157046186
새로운 기능: 2021
새로운

sheet width: 2570 mm plate thickness: 7 mm pre-bending: 6 mm diameter of upper rolls: 220 mm min. bending diameter: 330 mm total power requirement: 7,7 KW weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,45 x 1,12 x 1,38 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS SMR-S 2070 x 3/4
품목 아니오.: 157046188
새로운 기능: 2021
새로운

sheet width: 2070 mm plate thickness: 4 mm pre-bending: 3 mm diameter of upper rolls: 130 mm min. bending diameter: 260 mm total power requirement: 3,3 KW weight of the machine ca.: 1,6 t Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 3R OHS 2570 x 10/13
품목 아니오.: 157046192
새로운 기능: 2021
새로운

sheet width: 2570 mm plate thickness: 13 mm pre-bending: 10 mm diameter of upper rolls: 280 mm roll diam. bottom roll: 260 mm speed: 5 m/min total power requirement: 7,5 KW weight of the machine ca.: 7,82 t dimensions of the machine ca.: 4,65 x 1,45 x 1,6 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORGM 2050 x 3
품목 아니오.: 156639921
새로운 기능: 2021
새로운

sheet width: 2050 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 2,64 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORM 2070 x 4
품목 아니오.: 157046194
새로운 기능: 2021
새로운

시트 폭: 2070mm 시트 두께: 4mm 굽힘 용량: 3.5mm 상단 롤 직경: 140mm 총 전력 요구 사항: 2.2KW 기계 무게 약: 1.73t 공간 요구 사항 약: 3230 x 800 x 1100mm 기본 장비: - 원뿔형 굽힘 장치- 회전식 상부 롤러- 원뿔형 벤딩 장치- 구동 상부 롤러 - 벤딩 장치- 안전 장치 비상 라인 - CE 인증 문서 옵션 : 전기적으로 조정 가능한 리어 롤러 디지털 디스플레이 리어 롤러 경화 롤러 다른 크기와 성능의 추가 기계는 rs-sperling .de 데이터 f & uuml에서 찾을 수 있습니다.이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORGM 2550 x 3
품목 아니오.: 158385587
새로운 기능: 2022
새로운

sheet width: 2550 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: 3,14 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2070 x 40/45
품목 아니오.: 156876983
새로운 기능: 2021
새로운

sheet width: 2000 mm plate thickness: 45 mm pre-bending: 40 mn number of rolls: 4 Walzen diameter of upper rolls: 500 mm roll diam. bottom roll: 400 mm speed: 1 - 4 m/min total power requirement: 60 kW weight of the machine ca.: 33,5 t dimensions of the machine ca.: 5,65 x 2,85 x 3,0 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS SMR-S 2070 x 6/7
품목 아니오.: 157046200
새로운 기능: 2021
새로운

sheet width: 2070 mm plate thickness: 7 mm pre-bending: 6 mm diameter of upper rolls: 190 mm pre-bending capacity: 6 mm min. bending diameter: 285 mm total power requirement: 5,5 KW weight of the machine ca.: 3,48 t dimensions of the machine ca.: 3750 x 920 x 1260 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 1570 x 3 /4
품목 아니오.: 156640187
새로운 기능: 2021
새로운

sheet width: 1500 mm plate thickness: 4 mm pre-bending: 3 mm number of rolls: 4 Walzen diameter of upper rolls: 150 mm roll diam. bottom roll: 130 mm speed: 6 m/min total power requirement: 3,3 kW weight of the machine ca.: 2,47 t dimensions of the machine ca.: 3350 x 1200 x 1210 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORGM 1550 x 6
품목 아니오.: 156639940
새로운 기능: 2021
새로운

sheet width: 1550 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 510 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 2,5 kg dimensions of the machine ca.: 2,1 x 1,2 x 1,28 mm Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 3R OHS 2070 x 10/13
품목 아니오.: 156879301
새로운 기능: 2021
새로운

sheet width: 2070 mm plate thickness: 13 mm pre-bending: 10 mm diameter of upper rolls: 240 mm roll diam. bottom roll: 220 mm total power requirement: 7,5 KW weight of the machine ca.: 5,16 t dimensions of the machine ca.: 3,6 x 1,25 x 1,35 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2070 x 35/40
품목 아니오.: 157046214
새로운 기능: 2021
새로운

sheet width: 2000 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 460 mm roll diam. bottom roll: 380 mm speed: 1,5 - 5 m/min total power requirement: 38,5 kW weight of the machine ca.: 19,6 t dimensions of the machine ca.: 4,95 x 2,35 x 2,45 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2570 x 40/45
품목 아니오.: 157046215
새로운 기능: 2021
새로운

sheet width: 2500 mm plate thickness: 45 mm pre-bending: 40 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 450 mm speed: 1 - 4 m/min total power requirement: 66,0 kW weight of the machine ca.: 44,0 t dimensions of the machine ca.: 6,25 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 3070 x 50/60
품목 아니오.: 157046220
새로운 기능: 2021
새로운

sheet width: 3000 mm plate thickness: 60 mm pre-bending: 50 mn number of rolls: 4 Walzen diameter of upper rolls: 620 mm roll diam. bottom roll: 520 mm speed: 1 - 4 m/min total power requirement: 123 kW weight of the machine ca.: 62,3 t dimensions of the machine ca.: 7,25 x 3,3 x 3,35 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORGM 3050 x 3
품목 아니오.: 157046221
새로운 기능: 2021
새로운

sheet width: 3050 mm plate thickness: 2,0 mm cutting angle: 1,5 ° table width: 530 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3,64 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS SMR-S 2070 x 5/6
품목 아니오.: 156879310
새로운 기능: 2021
새로운

sheet width: 2070 mm plate thickness: 6 mm pre-bending: 5 mm diameter of upper rolls: 170 mm min. bending diameter: 255 mm total power requirement: 5,5 KW weight of the machine ca.: 2,1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2070 x 7/9
품목 아니오.: 156879571
새로운 기능: 2020
새로운

sheet width: 2000 mm plate thickness: 9 mm pre-bending: 7 mn number of rolls: 4 Walzen diameter of upper rolls: 220 mm roll diam. bottom roll: 180 mm speed: 5 m/min total power requirement: 7,0 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 4,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 1570 x 10/12
품목 아니오.: 156879574
새로운 기능: 2021
새로운

sheet width: 1500 mm plate thickness: 10 mm pre-bending: 12 mm number of rolls: 4 Walzen diameter of upper rolls: 250 mm roll diam. bottom roll: 200 mm speed: 5 m/min total power requirement: 9,0 kW weight of the machine ca.: 4,75 t dimensions of the machine ca.: 3,55 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2570 x 6/8
품목 아니오.: 156879071
새로운 기능: 2021
새로운

sheet width: 2500 mm plate thickness: 8 mm pre-bending: 6 mn number of rolls: 4 Walzen diameter of upper rolls: 250 mm roll diam. bottom roll: 200 mm speed: 5,0 m/min total power requirement: 9,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4,55 x 1,55 x 1,47 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2070 x 25/30
품목 아니오.: 156879327
새로운 기능: 2021
새로운

sheet width: 2000 mm plate thickness: 30 mm pre-bending: 25 mn number of rolls: 4 Walzen diameter of upper rolls: 380 mm roll diam. bottom roll: 300 mm speed: 1,5 - 5 m/min total power requirement: 31,5 kW weight of the machine ca.: 15,8 t dimensions of the machine ca.: 4,95 x 2,45 x 2,3 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS SBM 1070 x 95
품목 아니오.: 156879334
새로운 기능: 2021
새로운

시트 폭: 1070 시트 두께: 3.5 mm 스탠드 폭: 1100 mm 탑 롤 직경: 95 mm 작동 전압: 400 V 총 전력 요구 사항: 1.1 KW 기계 중량 약: 370 kg 공간 요구 사항 약: 1.35 x 0.76 x 1.25 m 기본 장비::- 용량 1050 x 3.5 mm - 원뿔형 벤딩 - 회전식 탑 롤러- 안전 장치 비상 라인 - 문서 옵션: 구동 백 롤러 경화 롤러 디지털 디스플레이 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 3R OHS 2070 x 25/30
품목 아니오.: 156879340
새로운 기능: 2021
새로운

sheet width: 2070 mm plate thickness: 30 mm pre-bending: 25 mm diameter of upper rolls: 380 mm roll diam. bottom roll: 360 mm total power requirement: 37 KW weight of the machine ca.: 13,15 t dimensions of the machine ca.: 4,65 x 2,15 x 1,95 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2570 x 3/4
품목 아니오.: 157046255
새로운 기능: 2021
새로운

sheet width: 2500 mm plate thickness: 4 mm pre-bending: 3 mn number of rolls: 4 Walzen diameter of upper rolls: 180 mm roll diam. bottom roll: 150 mm speed: 5,0 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 4,4 x 1,39 x 1,4 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 3070 x 25/30
품목 아니오.: 156876784
새로운 기능: 2021
새로운

sheet width: 3000 mm plate thickness: 30 mm pre-bending: 25 mm number of rolls: 4 Walzen diameter of upper rolls: 460 mm roll diam. bottom roll: 380 mm speed: 1,5 - 5 m/min total power requirement: 38,5 kW weight of the machine ca.: 33,7 t dimensions of the machine ca.: 7,0 x 2,35 x 2,45 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS SMR-S 3070 x 5/6
품목 아니오.: 156879344
새로운 기능: 2021
새로운

sheet width: 3070 mm plate thickness: 6 mm pre-bending: 5 mm diameter of upper rolls: 220 mm min. bending diameter: 330 mm total power requirement: 7,7 KW weight of the machine ca.: 5,87 t dimensions of the machine ca.: 4950 x 1120 x 1380 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2570 x 4/6
품목 아니오.: 156876789
새로운 기능: 2021
새로운

sheet width: 2500 mm plate thickness: 6 mm pre-bending: 4 mn number of rolls: 4 Walzen diameter of upper rolls: 200 mm roll diam. bottom roll: 180 mm speed: 6,0 m/min total power requirement: 5,5 kW weight of the machine ca.: 4,35 t dimensions of the machine ca.: 4,4 x 1,39 x 1,4 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 2570 x 2/3
품목 아니오.: 156879349
새로운 기능: 2021
새로운

sheet width: 2500 mm plate thickness: 3 mm pre-bending: 2 mn number of rolls: 4 Walzen diameter of upper rolls: 150 mm roll diam. bottom roll: 130 mm speed: 6,0 m/min total power requirement: 4,0 kW weight of the machine ca.: 3,33 t dimensions of the machine ca.: 4,35 x 1,21 x 1,2 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 4R OHS 3070 x 30/35
품목 아니오.: 157046263
새로운 기능: 2021
새로운

sheet width: 3000 mm plate thickness: 35 mm pre-bending: 30 mn number of rolls: 4 Walzen diameter of upper rolls: 500 mm roll diam. bottom roll: 400 mm speed: 1,5 - 5 m/min total power requirement: 60 kW weight of the machine ca.: 38,8 t dimensions of the machine ca.: 6,65 x 2,85 x 3,0 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORGM 1350 x 3
품목 아니오.: 156879351
새로운 기능: 2021
새로운

sheet width: 1.350 mm plate thickness: 3 mm cutting angle: 2,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1350 kg dimensions of the machine ca.: 2,6 x 1,94 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS ORM 2070 x 3,5
품목 아니오.: 157046264
새로운 기능: 2021
새로운

시트 폭: 2070mm 시트 두께: 3.5mm 굽힘 용량: 3mm 상단 롤 직경: 130mm 총 전력 요구 사항: 2.2KW 기계 무게 약: 1.7t 공간 요구 사항 약: 3230 x 800 x 1100mm 기본 장비:- 원뿔형 굽힘 장치- 회전식 상부 롤러- 원뿔형 굽힘 장치- 구동 상부 롤러 - 벤딩 장치- 안전 장치 비상 라인 - CE 인증 - 문서 옵션: 전기적으로 조정 가능한 리어 롤러 리어 롤러 경화 롤러 디지털 디스플레이 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS SBM 1270 x 95
품목 아니오.: 156876793
새로운 기능: 2021
새로운

시트 폭: 1270mm 시트 두께: 3.0mm 스탠드 폭: 1300mm 상단 롤 직경: 95mm 굽힘 용량: 2.5mm 굽힘 직경 - 최소: 190mm 작동 전압: 400V 총 전력 요구 사항: 1.1KW 기계 중량 약: 370kg 공간 요구 사항 약: 1.35 x 0.76 x 1.25mm 기본 장비:용량 1250 x 3mm 원뿔형 벤딩 스위블링 탑 롤러 안전 장치 비상 라인 문서 옵션: 구동 백 롤러 경화 롤러 디지털 디스플레이 데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 3R OHS 2570 x 25/30
품목 아니오.: 156640250
새로운 기능: 2021
새로운

sheet width: 2570 mm plate thickness: 30 mm pre-bending: 25 mm diameter of upper rolls: 420 mm roll diam. bottom roll: 400 mm speed: 1,15 - 5 m/min total power requirement: 37 KW weight of the machine ca.: 19,04 t dimensions of the machine ca.: 5,25 x 2,3 x 2,35 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS 3R OHS 2570 x 20/25
품목 아니오.: 156879354
새로운 기능: 2021
새로운

sheet width: 2570 mm plate thickness: 25 mm pre-bending: 20 mm diameter of upper rolls: 380 mm roll diam. bottom roll: 360 mm speed: 1,15 - 5 m/min total power requirement: 37 KW weight of the machine ca.: 14,4 t dimensions of the machine ca.: 5,15 x 2,15 x 1,95 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

범주: 107 판금 가공
최신 업데이트: 23.04.2024 감시 목록에 추가
기계: OSTAS RGM 1550 x 3
품목 아니오.: 156872921
새로운 기능: 2019
새로운

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

범주: 107 판금 가공
최신 업데이트: 22.04.2024 감시 목록에 추가
기계: OSTAS OPK 45
품목 아니오.: 163521844
새로운 기능: 2021
사용
값: 5.900 €

New OSTAS profile roller Type OPK-45 Shaft diameter 50mm Hydraulic top roller adjustment Digital readout Can be used horizontally and vertically

범주: 107 판금 가공
최신 업데이트: 22.04.2024 감시 목록에 추가
기계: OSTAS SMR-S 1270x190
품목 아니오.: 162904039
새로운 기능: 2021
사용
값: 22.000 €

New OSTAS SMR-S 1270x190 mm sheet rolling mill The SMR-S models are one of the most popular metalworking solutions for light to medium duty applications; this is due to their robust body and the driving of the upper and lower rollers by electric motors. STANDARD EQUIPMENT and TECHNICAL SPECIFICATION • Precisely matched shafts made of high-grade steel SAE 1050 (CK-45) • Spiral reducer with chain and belt drive and wheels gears driving the upper and lower rollers • Machine body made of ST-52 steel • Rear roller motor • Manual top roll opening • Roller for conical bending • Top roller support system • Centralized lubrication system • Mobile electric control panel • Compliant with CE standards • User manual SPECIAL EQUIPMENT • Stepless speed regulation • Digital display for rear roller • Rear roller dr ...

RESALE used machinery 25 years online