used DAEWOO for sale

Fanuc CNC model Version of the CNC 18i - T Main spindle nose ASA 8 Main spindle power 15 Kw Turning diameter 350 mm Turning length 536 mm Main spindle rpm 3500 Number of tool holder turrets 1 Number of tool places first turret 12 Number of fixed tool places first turret 12 First turret X-axis travel 220 mm Z axis travel first turret 580 mm Linear axis rapid feeds X Y Z 30 m/min Counter spindle yes Number of counter spindle revolutions 6000 Bar passage 90 mm Counter spindle Z stroke 500 mm

Used Daewoo Puma 230 MS cnc lathe Year 2003 IEMCA Bar loader Visible in Italy CE

DAEWOO PUMA 8S cnc lathe the machine is of USA origin therefore 220 three-phase it was tested after unloading for 5 years, with a transformer that I no longer own, it was working, new spindle never installed

Daewoo Puma 15 2-axis lathe (700x1500) Self-centering is an autoblock dia. 500

Control type FANUC iSERIES X axis stroke 820 mm Y-axis travel 410 mm Z axis stroke 510 mm Controlled axes 4 (fourth axis set up) Tool turret 20 positions Spindle speed 80/8000 rpm ISO 40 tool holder cone Motor power 9/11 kW Rapid advances : 24 m/min. Command handwheel Chip collection tank Year of installation 2001 CE Weight : Kg. 5.500 Complete with all documentation

Table dimensions: 1200x500 mm Max allowed weight on table: 800 kgs Traverses: Longitudinal traverse: 1020 mm Cross traverse: 510 mm Vertical traverse: 625 mm Spindle taper: BT 40 Speed range: 8000 rpm Equipped with: Electronic handwheel RANDOM tool changer 24 units Internal coolant supply

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-TB Technical data Number of axis total: 3 Number of spindles: 1 Number of revolvers: 1 Swing in gap: 330 mm Swing diameter over bed: 510 mm Max. turning diameter: 350 mm Maximum turning length: 400 mm Turret carriage: Longitudinal travel (Z-axis): 440 mm Transversal strocke (X axis): 242 mm Rapid traverse Z: 25 m/min Rapid traverse X: 20 m/min Turret slide: Number of positions: 12 Tool shank cross section: 25 mm Main spindle: Inner taper type: A2-6 Collet bore: 62 mm Spindle speeds: stepless from: 50 rpm up to: 5000 rpm Tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Spindle motor: 11/15 kW Voltage 50 Hz 3x: 400 Volt Total power required: 35 kVA Machine´s weight about: 3940 kg Overall dim ...

Turning diameter: 510 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18 T MACH-id   4139 MAKE        DAEWOO - Korea TYPE         PUMA 200 LMA YEAR        09.1999 SPECIFICATIONS Swing over bed Ø        510 mm Control     FANUC 18 T Swing over cross slide      330 mm Distance between centres    550 mm Spindle bore      46 mm Spindle speeds / ranges      6000 Rpm Power       11 Kw DIMENSIONS Length         2660 mm Width           1700 mm Height          2000 mm Chip conveyotr Coolant system Large tooling package

Center height: 0 mm Center distance: 770 mm Spindle bore: 77 mm Make Puma 10 S CNC Type DAEWOO PUMA 10 S Year 90 er FANUC O - T daewoo puma cnc lathe draaibank Centre height (mm) Swing = 580 Center distance (mm) DBC = 770 Spindle boreBore = 77 Turret 10 Positions Speeds 2500 Rpm Rapid 10.000 mm/Min  

Turning diameter: 900 mm Turning length: 1650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:900mm X-Axis:        470mm Z-Axis:        1.650mm Speedrange:    1-800 Rpm Spindle power: 45kW ATC / revolver:12 Control:       Fanuc 18i-T  Chip conveyor: Yes  Length:        5.030 mm  Width:         2.300 mm  Height:        2.800 mm  Weight:        16.100 kg  Tailstock Renishaw HPA Tool Setting Arm Filtermist FX 7002 Mist Extraction Unit & Foot Switches  

Turning diameter: 510 mm Turning length: 400 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T MAKE` Daewoo Korea TYPE    PUMA 200 C YEAR   11.1998 SPECIFICATIONS Swing over bed Ø  510 mm Control   Fanuc 18 T Swing over cross slide   330 mm Distance between centres    400 mm Spindle bore   76 mm Spindle speeds / ranges    4500 Rpm Power    15 Kw DIMENSIONS Length   2660 mm Width    1635 mm Height    2000 mm

Table length: 7000 mm Table width: 1200 mm Longitudinal X: 7000 mm Cross Y: 2000 mm Vertical Z: 600 mm CNC Brand: Fanuc CNC Model: 16 iMB Make HNK Daewoo Type HKDB 130 P Year 2000 Fanuc 16 iMB Spindle diameter (mm) 130/26/2500 Table length (mm)  L = 7.000 Table width (mm) W = 1.200 Longitudinal X (mm) X = 7.000 Cross Y (mm) Y = 2.000 Pos ATC Z = 600 Number APC. Duplex borer 2 x Chain ATC 60 Pos. 2 x pallet 7000 x 1200 2 x chip conveyor  

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 1000 mm Cross Y: 800 mm Vertical Z: 850 mm Number of pallets: 2   Positions ATC: 60   CNC Brand: Fanuc X - Travel:               1000mm Y - Travel:               800mm Z - Travel:               850mm B-Axis indexing:          360000° Table Length:             630mm Table Width:              630mm Table load:               1600 Number of pallets:        2 Feed rate X-Axis:         12000mm/min. Feed rate Y-Axis:         12000mm/min. Feed rate Z-Axis:         12000mm/min. Spindl ...

Turning diameter: 580 mm Turning length: 100 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc CNC Model: O T Make Daewoo 315 L Type 315 L ECOTURN Year1995 Fanuc OT CNC turning lathe daewoo ecoturn 315 L Centre height (mm)Swing = 580 Center distance (mm)DBC = 1.000 Spindle bore Turret = 10 Pos Chip conveyor Kitagawa 315 mm  

Turning diameter: 700 mm Turning length: 1105 mm Turret positions: 12 CNC Brand: Fanuc DAEWOO - PUMA 350 CNC Lathe Ø 480 x 1050 mm MACH - ID 6305 Make: DAEWOO Type: PUMA 350 Control: FANUC YOP: 1998 Max. turning Ø   700 mm X-Axis     362 mm Z-Axis     1.105 mm Spindle bore      91 mm Speedrange       3500 Rpm Spindle power       26 kW ATC / revolver      12 Control       Fanuc 18iT Chip conveyor       Yes Pinole taperMk     6 Mk Stroke pinole        120 mm Dimensions Length     4.000 mm Width       2.400 mm Height      2.300 mm Weight      8.200 kg