하위 범주
(3 카테고리 레벨)
생산자:
(범주: 301)
Ejection stroke: 35mm, weight: 700kg. ... 추가 정보
INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar
Description: Umbaumöglichkeit horizontal/vertikal für Spritzeinheit Spannkraft 350 kNApprox. Onsite Dimension. (l x w x h): 2,700 x 1,500 x 2,500 mm, weight approx.: 1,800 kg ... 추가 정보
BATTENFELD 400/150 S-KS /⦠/ 12/80 injection molding machine Year of prod. 1981 The machine is fully operational, not used for 5 years, ready for transport ... 추가 정보
Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... 추가 정보
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation. ... 추가 정보
clamping force: 700 kNinjection volume: 103 cm³screw diameter: 30 mmplaten size: 432 x 310 mmclosing stroke: 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... 추가 정보
Arburg 모델 Allrounder 221-75-350, 새로운 1984로 만든 중고 사출 성형기. 폐쇄력: 350kN/톤. 사출력: 77kN/톤. 작동 전압 : 380V, 50Hz. 난방: 3.4kW. 펌프 모터: 7.5kW. 총 부하: 10.9kW. ... 추가 정보
Injection molding machine BM-BIRAGHI model HORIZON 4370/650, Italy, 1985 Clamping force - 650 tons. Injection volume - 2000 cm3. The maximum injection pressure is 150 bar. Distance between columns 800x800mm. New screw pair f.90 mm. ... 추가 정보
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 50,409h. ... 추가 정보
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 56,736h. ... 추가 정보
Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... 추가 정보
품번:27-06-304 제조사: Arburg 아주 좋은 일반 상태 기계 작업장 테스트 완료 배송 시간 : 판권 소유. 건축 년도 : ca.1985 L x W x H: 약 2700x1200x1800mm 무게 : 약. 930kg 닫는 면: 클램핑 력 : 약. 250kN 홀름 치수 hxv : ca.221x0mm 플레이트 크기 hxv: 약. 342x250mm 설치 높이 최소 : ca.150mm 설치 높이 최대: 약 300mm 플레이트 간격 최대: 약 500mm 조리개 이동: 약 200mm 살포 측: 나사 직경: 약 22mm 배기량: 약 38cc 사출 압력 : 약. 1500bar 요청시 다른 액세서리 제공 요청 시 가격 및 기타 기술 데이터 제
Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (=standard) mm M12-M16 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
The press is currently decommissioned, and is equipped with an inverter for which it has energy consumption reduced to 50% It is equipped with a pneumatic solenoid valve. The cylinder is Bimetal replaced new for 3 years (polystyrene has always worked) ... 추가 정보
엥겔 사출 성형 기계 유형: ES 2000-350 통제: CC 90 건축의 년: 1987년 클램핑 장치 클램핑 포스 t: 350 개방 거리 mm: 700 타이 바 치수 mm: 735x735 설치 높이 최소/최대 mm: 250/660 격판덮개 크기: 1080 엑스 1080 주입 장치 나사 직경 mm: 70 살포 무게 gr: 1009 스프레이 볼륨 cm³: 1154 스프레이 압력 바 : 1400 치수와 무게 치수 LxWxH m : 9,00 x 2,10 x 2,40 기계 무게 kg: 20500 다른 유로맵 12 엥겔 로