접착제 기계 사용 판매를 위해

Description: Brand: Brandt Type: KDF 210 Year of construction: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ Speed-controlled track control with optical start-stop indication sensors Control screen: LCD, 4 lines of text, ergonomically integrated on the input side on the hood Configuration: Chain conveyor transport Central lubrication Upper pressure/ guidance: via central adjustment with 2 rows of rollers positioned offset to each other Joint cutters: (2x) 0.75 kW, 200 Hz Diamond-tipped tool, manual positioning (Siko counters), max. 3 mm overhang and max. 40 mm workpiece thickness Glue unit: A3 glue unit for hot-melt and possibility for PU glue application Glue output roller under workpiece in following or counterflow mode Heavy-duty cutter Pressure zone: Pneumatically driven 1st pressure roller, 2nd roller running freely ensures good compaction Hacksaws: (2x) 0.18 kW,  ...

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor.serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 - 60 mm, Approx. On ...

edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,800 mm, weight approx.: 700 kg ... 추가 정보

Description: HOMAG OPTIMAT Edge Bander (incomplete)Approx. Onsite Dimension. (l x w x h): 10,230 x 1,150 x 2,080 mm, weight approx.: 3,500 kg ... 추가 정보

Description: Workpiece thickness 6 - 50 mm Min. length 60 mm Maximum width 180 mmApprox. Onsite Dimension. (l x w x h): 4,000 x 1,200 x 1,400 mm, weight approx.: 970 kg ... 추가 정보

Description: FRAVOL Edge Bander for Shaped Pieces(incomplete)Approx. Onsite Dimension. (l x w x h): 1,280 x 990 x 890 mm, weight approx.: 500 kg ... 추가 정보

Description: Max. board thickness 15 mm, max. solid wood height 50 mm, min. panel length 150 mm, min. workpiece width 50 mm, max. feeding speed 20 m/min, total power 10 KW, Glueing unit complete with edge press rollers End cutting unit Trimmer unit Edge trimming unit Edge scraper unit Brush unitApprox. Onsite Dimension. (l x w x h): 4,500 x 1,200 x 1,450 mm, weight approx.: 1,200 kg

Description: HOMAG OPTIMAT KAL 310 / 7 / A20 / S2 Edge Bander with return sistem control - yes edge buffing unit - yes edge magazine with - yes edge sanding unit - no edge thickness - yes feed - 18-20 mts/min fine trimming unit - yes flat scraping unit - yes gluing unit - yes joint trimming unit - yes , profile scraping unit - yes profile trimming unit - yes return system - yes , workpiece overhang - 30 mm workpiece pre heater - yes workpiece thickness - 10-60 mm dimension (l x w x h) and weight approx. (6 packs) 8800 x 1000 x 1900 mm - 5000 Kg 3500 x 1300 ,x 900 mm - 300 Kg 2900 x 1800 x 900 mm - 600 Kg 6400 x 1300 x 900 mm - 1000 Kg 2000 x 1300 x 900 mm - 200 Kg 800 x 500 x 1000 mm - 100 Kgworkpiece thickness: 10 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 20 m/min, joint trimming unit: Yes, workpiece pre heater: Yes, gluing unit: Yes, fine trimming unit: Yes, profile  ...

Description: IMA ADVANTAGE 4612 Edgebander Motor data: 380 V - 50 Hz - 15 Kw - 37 A Suction nozzle: 120 mm Pre-wired for Pre-milling Unit Space Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 45 mm Edge material height: 14 - 55 mm End trimming unit Rough Milling unit MFA Milling Unit (Fine Milling + Corner Rounding) Profile Scraper + Flat Scraper + Buffing unit Feed approx.: 12 m/min Compressed air approx.: 7 bar serial number: 02305, edge thickness: 0,4 - 12 mm, workpiece thickness: 50 mm, feed: 12 m/min, control: IMA 1101, Approx. Onsite Dimension. (l x w x h): 6,100 x 1,800 x 2,000 mm, weight approx.: 3,100 kg

Description: HOMAG OPTIMAT KAL 310 Edge Bander (incomplete)Approx. Onsite Dimension. (l x w x h): 8,060 x 1,010 x 1,870 mm, weight approx.: 3,500 kg ... 추가 정보

Description: Edge height max 51 mm Minimum workpiece length mm: 180 Electro-motor height adjustment: yes  ,edge thickness: max 13 mm, workpiece width min.: 60 mm, feed: 11 m/min, gluing unit: YES, snipping unit: YES, rough trimming unit: YES, fine trimming unit: YES, profile scraping unit: YES, edge buffing unit: YES, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 x 0 x 0 kg

Description: HOMAG KL 76/A20 Edge Bander (incomplete)Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg ... 추가 정보

Description: -Edge height: 13 - 50 mm -Max. solid wood cross-section: 15x45 mm -Min panel length: 140 mm -Min panel width (with 150 mm length): 85 mm -Min panel width (with length 250 mm): 50 mm -Three-phase line -Voltage: 380 V -A max: 22 -Frequency: 50 Hz -Max inverter frequency: 200 Hz -Control voltage: 110 V -Motor power: 15 Kw - 53 A - 11 Nl/cycleedge thickness: 0.5 - 15 mm, workpiece thickness: 10 - 45 mm, workpiece overhang: 25 mm, feed: 10 - 20 m/min, Approx. Onsite Dimension. (l x w x h): 6,300 x 1,450 x 1,450 mm, weight approx.: 2,550 kg

Description: IMA ADVANTAGE 550 Edge Banderworkpiece thickness: 10 - 60 mm, workpiece overhang: 30 mm, workpiece pre heater: Yes, gluing unit: Yes, fine trimming unit: Yes, profile trimming unit: Yes, edge sanding unit: No, flat scraping unit: Yes, profile scraping unit: Yes, edge buffing unit: Yes, control: Yes, Approx. Onsite Dimension. (l x w x h): 7,750 x 1,280 x 1,700 mm, weight approx.: 2,500 kg

Description: Min Panel Width 80 mm Max Panel Thickness 60 mm Thickness Min 10 mm Panel Feeding Speed ​​9-14 m / min 380 V 50 Hz Motor Power 8 Kw Noise 84.8 DbApprox. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 1,200 mm, weight approx.: 800 kg ... 추가 정보

Description: BRANDT T-55 Edge BanderApprox. Onsite Dimension. (l x w x h): 1,300 x 900 x 800 mm, weight approx.: 150 kg ... 추가 정보

Description: HOMAG KAL 310 Edge Bander control - yes Joint milling unit - yes edge magazine with - yes End trimming unit - yes edge thickness - yes feed 18 - 20mts / min fine trimming unit - yes flat scraping unit - yes profile trimming unit - yes Buffing unit - yes universal milling unit - no workpiece overhang - 30 mm workpiece pre heater - yes workpiece thickness 10 - 60 mm workpiece thickness: 10 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 20 m/min, workpiece pre heater: Yes, fine trimming unit: Yes, profile trimming unit: Yes, universal milling unit: No, flat scraping unit: Yes, control: Yes, Approx. Onsite Dimension. (l x w x h): 3,830 x 2,390 x 1,980 mm, weight approx.: 1,500 kg

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be definedserial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x  ...

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

Description: - Inlet ruler with automatic adjustment and extension 500 mm - BONDING PART A20 BASIC - Pressure zone C with automatic adjustment - Release agent spray unit - Pre- and profile milling unit with pneumatic adjustment - Edge sanding unit KS10 - Profile sanding unit top/bottom PS41 / PS42edge magazine with: 2 -fold roller, serial number: 0-200-21-6055, edge thickness: 0,3 - 3 (20) mm, workpiece thickness: 8 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 25 m/min, joint trimming unit: 2 x 3 KW, gluing unit: A20/QA34/C, snipping unit: HL84 (2 x 0,8 KW), rough trimming unit: 2 x 1,5 KW, fine trimming unit: 2 x 0,4 KW, profile trimming unit: FF12 (4 x 0,4 KW), edge sanding unit: KS10 / PS41 / PS42, flat scraping unit: ja / yes, profile scraping unit: MN21 automatic, edge buffing unit: ja / yes, control: Power Control PC 22, return system: Nein / No, Approx. Onsite Dimension. (l x w  ...