접착제 기계 사용 판매를 위해

Description: IMA COMPACT PC/F/DV/6220 Edgebander Panel thickness: 10 mm Pre-Milling Unit Edge thickness: 12 mm End trimming unit Rough Milling unit MFA Milling unit (fine trimming + Corner rounding) Profile Scraper + Flat Scraper + Buffing unit Feed advance: 12 m/min Cut shear to: 0.2 - 3 mm Working height: 873 mm Max plate thickness: 45 mm serial number: 07048, control: IMA, Approx. Onsite Dimension. (l x w x h): 7,450 x 1,000 x 2,000 mm, weight approx.: 3,000 kg

Description: HOLZ-HER LUMINA 1380 Edgebander Feed rate: 10 - 18 m/min Operating dimensions Minimum workpiece length: 160 mm Minimum workpiece width: 60 mm Workpiece thickness: 8 - 60 mm Edging thickness: 0.4 - 8 (15) mmApprox. Onsite Dimension. (l x w x h): 5,740 x 1,200 x 2,100 mm, weight approx.: 2,000 kg, Serial Number of Manufacturer: 289/1-907

Description: GRIGGIO GB 5/8 RA Edgebander Workpiece thickness: 10 - 60 mm Max thickness of the panel: 60 mm Min width of the panel: 60 mm Min length of the panel: 120 mm Min thickness of the panel: 10 mm Edge thickness: 0,4 - 8 mm Edge dimensions in roll: 0,4 - 3 mmserial number: 15E000243900300, control: SIEMENS SMART LINE, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,100 x 1,600 mm, weight approx.: 2,500 kg

Description: Machine-nr.: 0-261-26-5028 Control: EC 10+ Speed-controlled control with optical start-stop indicator sensors Operating switch: ergonomic LCD switch mounted on the head Border thickness: 0.3 mm / max. 8.0 mm Band cutting device: 0.4 - 3.0 mm (Max. 3.0x30 mm / 1.0x55 mm) Band width edges: max. (1x) 55 mm / (3x) 45 mm Workpiece thickness: 8 - 50 mm . Workpiece width: min. 60 mm Workpiece overhang: min. 38 mm Performance: 11 m/min Workpiece pre-heating Roll magazine: Max. ø800 mm Cut-off shear: 3 mm Glue aggregate1: Hot melt granule Glue pot under glue output roller Gluing roller in travel or - in counterflow Glue aggregate 2: Airteq Hot-Air glue aggregate Pressure zone: Pneumatically driven (1st pressure roller, 2nd roller running freely ensures good compaction) Air supply units: (2x) 2.2 kW, 200 Hz Includes mounted DIA cutters Gluing unit: workpiece preheating Pressure zone ...

Description: machine number 0-261-20-6375 edgeband thickness max 3 mm thickness of coiled edgeband max , ,  ,3 mm feedrate max 10 m/min corner rounding unit 1 motor scraper unit , ,  ,Profile scraper control , ,  ,BRANDT EASYCONTROL EC 10+ edgeband height max , ,  ,54 mm workpiece length min , ,  ,70 mm preheating zone , ,  , glue system granulate glue pot below feeding chain quick-change glue pot , ,  , trimming saw 2 motors flush/radius/chamfer milling units , ,  ,1 buffing unit , ,  , magazine for single strips , ,  , type right-side machine supply 400 V/230 V, 3 phases, 50 Hz max. operating full load current 8 A, fuse 16 A control voltage 24 V , total connection , ,  ,5,5 kW  , serial number: 0-261-20-6375, edge thickness: 0.4 - 3 mm, workpiece  ...

Description: Workpiece and edge parameters Workpiece width min: For workpiece thickness 8-22 mm | 70 mm For workpiece thickness 23-40mm | 120 mm For workpiece thickness 41-60mm , 150 mm depending on the workpiece length Workpiece protrusion | 38 mm Workpiece thickness | 8 - 60 mm Max. edge height = workpiece height, + 6 mm Edge material roll / 0.4 - 3 mm Edge cross-section max. For PVC | 135 mm For veneer | 100 mm Max. roll diameter , 830 mm Edge material strip , 0.4 - 15 mm (or 12 mm) (When using the VKNR 4845 exchange trimming unit, the max. edge thickness is 12 mm!) Max. edge cross-section For strips ' 600 mm If no radius is specified, R=2 mm is retracted and delivered serial number: 0-261-20-5413, workpiece thickness: 8 - 60 mm, feed: 8 - 18 m/min, joint trimming unit: 2 x 2,2 kW, gluing unit: A12, snipping unit: 2 x 0,35 kW, rough trimming unit: 2 x 0,55 kW, profile trimming  ...

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: machine number: 0-261-20-8279 workpiece thickness: 8 - 50 mm edge material thickness: 0,4 - 3 mm feed speed: 11 m/min extraction diameter: 3x80/1x100 mm pneumatics: 6 bar  , please also have a look at the PDF document of this machine serial number: 0-261-20-8279, edge thickness: 3 mm, workpiece thickness: 8 - 50 mm, feed: 11 m/min, Approx. Onsite Dimension. (l x w x h): 4,153 x 1,525 x 2,182 mm, weight approx.: 1,300 kg

Description: supply voltage 3 x 400 (50 Hz) V standard installed power 11 kW, with the airmotion option 16 kW feeding table with air cushion 1050 x 400 mm milling group application group cutting group at the ends rounding group at the ends radia finishing group surface finishing group finishing group with brushes constructive characteristics, standard working dimensions: the minimum width of the processed part - 70 mm the minimum length of the processed part - 140 mm the minimum height of the processed part - 8 mm the maximum height of the processed part - 60 mm the thickness of the applicable PVC/ABS edge film - 0.4 - 3.0 mm applicable thickness of solid wood wand - 0.4 - 12.0 mm compressed air working pressure (min/max) >,7 / 12 bar compressed air system pressure >,8 bar internal diameter of compressed air installation connection: 13 / 1/2' mm for more details see 4-Tempora F800. ...

Description: serial number edgebander: 0-200-96-0454 supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 40 A fuse 50 A control voltage 24 V serial number return system: 0-284-96-1370 , supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 3,3 A fuse 16 A control voltage 24 V ATTENTION: Part marked in red NOT included Please also have a look at the pdf files of this machine  ,serial number: 0-200-96-0454, Approx. Onsite Dimension. (l x w x h): 8,365 x 2,000 x 1,820 mm, weight approx.: 5,000 kg

Description: serial number: 6294 , edge thick: 0,4 - 3 mm edge thick with L-Tec: 0,7 – 3 mm min. panel lenght without rounding unit: 70 / 120 mm min. panel lenght with rounding unit: 95 mm installed power: 10 kW min. panel width without roundin unit: 95 mm min. panel width with roundin unit: 120/250 mm max panel thick with pre-milling Unit: 60 mm max panel thick with rounding unit: 60 mm max panel thick without pre-milling and rounding unit: 60 mm min panel thick: 10 mm working speed: 11 - 18 mt/1’ dust outlets: Nr. 02 Ø 150 mm pneumatic operating pressure: 6 ATM , supply 400 V, 3 phases, 50 Hz , current 9 A d please also have a look at the pdf files of this machineserial number: 6,294, edge thickness: 0.4-3 mm, workpiece thickness: 10 mm, feed: 11-18 m/min, control: BM PCS12, total power approx: 10 kW, Approx. Onsite Dimension. (l x w x h): 5,700 x 850 x 1,800 mm, we ...

Description: serial number 209/1-506 series KAM15V3 ordernumber 15506565 control PPC 315 with Touchsreen feed rate: 10 - 18 m/min workpiece length: min. 160 mm workpiece width: min. 60 mm workpiece thickness: 8 - 60 mm edge thickness: 0.4 - 8 mm serial number: 209/1-506, workpiece thickness: 8 - 60 mm, feed: 10-18 m/min, control: PPC 315, Approx. Onsite Dimension. (l x w x h): 5,340 x 1,823 x 2,030 mm, weight approx.: 1,750 kg

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm Workpiece protrusion: 30 ...

Description: MACHINE DESCRIPTION WILL BE UPDATED & AMENDED if necessary 10.40.06 - European safety regulations (C.E. mark) 01.08.47 - Olimpic S 1000 - 'T-ERS' version (61) Basic equipment Ribbed steel machine stand with tubular reinforcements for optimum work unit support Pivoting control panel Support roller track with ball bushing guide along the entire length of the machine Protective hood with sound-absorbing material, complete with interior lighting for the cabin and gluing area Extraction nozzle arranged on the sound-absorbing hood Electrical system with lockable main switch and thermomagnetic motor protection switch Emergency/off button in the infeed and outfeed inverter 93.07.31 - Volt 400 EU 93.12.01 - Frequency 50 Hz 62.11.07 - Preparation for barcode reader allows the subsequent connection of a barcode reader in order to integrate the machine into the 'Net-Line' cell. 62.1 ...

Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  ,edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

Description: serial number AH00004035 variable track feed speed 12-18m/min panel thickness 8-60 mm thickness of edges in strips 0,4-8 mm thickness of rolled edges 0,4-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) (with unit adjustment modification) 60 mm opening for panel support roller 560 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document ,PDF - OLIMPIC K 560 R PS 7.pdfserial number: AH00004035, Approx. Onsite Dimension. (l x w x h): 5,000 x 1,300 x 1,900 mm, weight approx.: 1,900 kg

Description: serial number AH00004898 track feed speed 11 m/min panel thickness 8-60 mm thickness of edges in strips 0,3-6mm thickness of rolled edges 0,3-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm exceeding material to the panel thickness 2+2 distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) 90 mm opening for panel support roller 500 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document PDF - OLIMPIC K 360 HP.pdf  ,serial number: AH00004898, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,300 x 1,800 mm, weight approx.: 1,400 kg