saws used for sale

Chain width 250 mm unit 220 mm cutting height up to 150 mm 15 kw motor  ... more information

Multi-blade saw Cosmec SM 100 Machine No. 2632 Year: 1994 Production COSMEC Italy 22kW (30HP) 380V, 40 Hz Variable speed 5/30 m/min Saw blade min/max 250/300mm Max. cutting depth 100mm Width feed belt/transport chain 250mm Max. distance between 2 saw blades 230mm Minimum workpiece length 600mm Dimensions: 1650x1400x1300 Weight 1300kg

Carriage length: 3000 mm; Cutting width at width fence: 1100 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 125 mm; Scorer: Height adjustment saw blade: handwheel; Saw blade swivel adjustment: handwheel; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 400mm; Speeds: 3200 / 4000 / 6000; Motor power: 5.5 kW; Engine braking: yes / automatic; Suction port: 80 mm and 125 mm; Machine length: 3400 mm; Machine width: 1800 mm; Weight:

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the bo ...

(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition  ... more information

Sawblade tiltable: 45 °Length of the rolling table: 2.800 mmcutting width: ca. 1.100 mmMotor output: 7,5 kWCutting height: ca. 153 mmSaw blade diameter: 450 mmSpeed: 3/4/5/6.000 U/min.weight of the machine ca.: ca 1.000 kg: Ja : Ja : Hydraulisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 125 mmMotor output: 3 kWcutting width: 700 mmSaw blade diameter: 450 mmcutting width: ca. 700 mmLength of the roller table: links. 2.000 mmLength of the roller table: rechts. 2.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 540 x 600 mm Cutting width: 480 mm Super cutting height: 385 mm Roll diameter: 500 mm Saw blade length: 4,080 mm Power: 2.2 kW Speed: 2,800 rpm with engine brake Dimensions: 810 x 945 x 1,970 mm Weight: approx. 210 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 800 x 750 mm Cutting width: 680 mm Super cutting height: 480 mm Roll diameter: 700 mm Saw blade length: 5,000 - 5,150 mm Power: 3 kW Speed: 1,400 rpm Precision table swivel device with handwheel and rack Engine brake Dimensions: 1,290 x 800 x 2,300 mm Weight: approx. 580 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Manufacturer: Düspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995 ... more information

SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - n.2 motors 2 hp - n. 2 blades diam. 350 mm - min / max working length 220/1200 mm - cutting inclinations: horizontal +/- 35°; vertical +/- 35° - volt. 380/50 - year 1995  ... more information

Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used.  ... more information

I sell a cut-off saw Raimann JRION HFS-170-3200. Built in 1995 / Kuper renovated in 2002. Cutting length 3300mm. Cutting height 170mm. Main motor 11kW Mounting surface W.4500mm x D.1700mm Rear buttock fence with digital display up to 450mm Front side stop for square work. Laser indication of the cutting line. Very good condition. Available soon. Incl. full documentation and CE certificate.

Equipment: - Scoring saw unit - Sliding table length 3300 mm - Cutting width 1250 mm, adjustable by handwheel - Cutting height and angle above hydr. Adjustable foot pedal - Control panel at eye level with digital display for cutting width, height and angle - Saw blade Ø 200-500 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt folding - Electrical: 400 V, 50 Hz, 3~, 13.0 A

Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - automatic spacing of discs with the possibility of programming - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - possibility to program 10 dimensions per disc - control 69 P22 - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Multisaw Edger two floating discs Raimann KS 310 BV - year of manufacture 1995 - German production - DTR - automatic spacing of discs with the possibility of programming - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - possibility to program 10 dimensions per disc - control 69 P22 - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Manufacturer: Hüllhorst, Year: 1995, Type: HGV, Control: ferro, Cutting depth mm: 50, Working hight mm: 80, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +-60, Work piece length max mm: 4200, Loading stations: yes, Length to slide in mm: 4000, Drill head vertical controlled spindles: 4, Tool exchange places: yes, Collet chuck: yes, Optimisation: 1, Required space L x W x H mm: 6, Compressed air bar: 3000, Maschine mit automatischem Einlegemagazin die Teile werden über eine Spannzange übernommen und der Säge zugeführt, Year :1995

Manufacturer: Hüllhorst, Year: 1995, Type: KLS 430, Control: Ferrocontroll, Program: 250, Cutting depth mm: 120, Working hight mm: 60, Holz-Querschnitte mm: yes, Positioniergenauigkeit mm: +45-45, Feeding speed max m/min: 3800 kann verlängert werden, Feeding speed continous adjustable: ca.4, Slewing range degrees: yes, Work piece length max mm: no, wood lenght max mm: 500, Loading stations: 5000, Strichcodierung: yes, Saw Blade Diameter mm: 8, Length to slide in mm: yes, Spindles: yes, Drill head vertical controlled spindles: yes, Exhaust diameter mm: yes, machine ready for demonstration: zusätzlich 90 Grad Sägestation und Etikettendrucker, Year :1995

Manufacturer: Hüllhorst, Year: 1995, Type: Kranzprofilsäge, Control: Ferrocontroll, Cutting depth mm: 250, Working hight mm: 120, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +45-45, Work piece length max mm: 4500, Kw Leistung Sägemotor: ca.4, Loading stations: yes, Waste conveyor: no, Saw Blade Diameter mm: 500, Length to slide in mm: 5000, Drill head vertical controlled: yes, Spindles: 8, Drill head vertical controlled spindles: yes, Collet chuck: yes, Optimisation: yes, Maschine vorführbereit: yes, Year :1995

Description: Serial Number 211.004 Retrofited  ,on 2014 Working ,dimensions: 4300x4200 mm Max. cutting hight:  ,150 mm Max. saw  ,Diameter: 450 mm , Main saw power: 20 kw approx Floating table: ,4200x2200 mm Inlet rotable table 90º longitudinal and cross-sectional Total power:  ,31kw , The saws on pictures are included , serial number: 211.004, cutting length: 4,300 mm, air table: yes, Approx. Onsite Dimension. (l x w x h): 13,000 x 2,500 x 2,230 mm, weight approx.: 17,700 kg