subcategories
(3rd category level)
Manufacturer:
(Category: 201)
Thin section creel NEVA type Orbit Plus TR 88 • Cutting height (mm): 250 ... more information
Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200 ... more information
Semi-automatic cross-cut saw Saw blade diameter 400mm Motor 3kW Sawing capacity 50 x 300mm, 100 x 190mm ... more information
Technical data: Saw blade diameter 1200 mm Max round wood diameter 450 mm Min round wood diameter 50 mm Saw motor power 20 kW / 975 RPM Hydraulic saw hub Dimensions L 3500 mm x W 2000 mm x H 3500 mm Weight 3600 kg + Conveyor 10 m with 7 hydraulic length stop systems ... more information
Revolving crosscut saw with extremely accurate length cutting for wood. High-precision cutting with servo-drive. Suitable for maximum dimensions cutting width up to 370 mm. Machine length: 4.400 mm ... more information
Semi-automatic undercounter cross-cut saw OMGA, model T421ST Saw blade diameter 400mm Cutting capacity: 20x270mm, 50x250mm, 100x190mm, 115x152,5mm Stroke saw blade pneumatic Support table inlet and outlet side Adjustable speed Two-hand operation (CE) 10 degree inclination, workpiece lies at the machine stop Motor 2,7kW
SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...
Equipment: - Cutting height and angle electronically controlled - Cutting width can be adjusted electrically via control - Length stop with continuous system, cutting length 60 mm - 2120 mm, extendable up to 3300 mm - Table size: 850 mm x 1050 mm in cast iron - Table extension over full table width - Transverse table dimensions 1340 x 650 mm, angle cuts according to scale without moving the fence; Fixed positions for 0°, 22.5°, 30° and 45° cuts - Extraction connection Ø 100 and 120 mm - Control via 5.7" touch screen via control panel at eye level - With document holder on the control panel - 3-axis scoring unit, electrically adjustable, pneum. can be closed/lowered Specifications: Trimming table length 3.0 m Cutting width 850 mm Saw blade swivel 0°-46° Cutting height max. 130 mm (saw blade Ø 400 mm) Table height 900 mm Motor power 5.5 KW (7.5 HP) 400 V-50 Hz ...
track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depen ...
– year of manufacture 2007 – DTR documentation – Czech production – two lasers – ruler TECHNICAL PARAMETERS: track width 440 mm cutting height 55 mm – 200 mm disc diameter 320 mm main engines 2 x 75 kW feed motor 3 kW feed speed adjustable on the inverter up to 60 m/min five upper pressure rollers bottom auxiliary roller five rows of latches electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm connection diameter 200 mm transport dimensions (L/W/H) 280 / 245 / 230 cm weight 5120 kg
I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.
Used ALTERDORF sliding table saw mod. F45 Serial number 07-08-10-142 Electronically controlled two-axis adjustment for tilt and cutting height with automatic gradage-dependent blade height correction Digital Rip Fence Viewer Maximum carriage stroke mm 5000 Maximum cut at the square fence mm 4420 Maximum tilt from 0 to 45 degrees Machine without engraver Maximum cut at rip fence mm 1350 Maximum blade diameter mm 550f Engine power 15 hp N. 3 blade rotation speeds: 3000/4000/5000 rpm Maximum cutting height 200 mm at 90 degrees Maximum cutting height 139 mm at 45 degrees Year 2007 EC
I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.
cutting diameter: 530 mmsaw band length: 6670 mmcutting width: 530 mmControl: CNC main drive motor: 7,5 kWroll guideway: optional total power requirement: 13 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: mFully automatic band saw roller conveyor Dimensions: 4000x700The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Abbund Chain Saw Sauer ZKS 2033 Sword length 330 mm a replacement chain plus chain wrench available Built in 2008 This blow chain saw was little used and looks almost like new. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Manufacturer: Biesse Selco, Type: EBT 120, Year: 2008, Bench top saw: 4400x2200, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Saw blade protrusion: 122, Vorschub Sägewagen : 1-150, Min-max feed programming slider m/min: 100, Saw Blade Diameter mm: 430, Main motor kW: 15, Feeding speed continous adjustable: yes, Scoring Aggregate : 2,2 kW, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Feeding speed continous adjustable: yes, Year :2008
Manufacturer: Biesse, Type: Selco EB 108, Year: 2008, Program: Selco Optiplaning, Optimisation: Selco Osi Plus, Max plate format mm: 4200 X 2200, Saw blade protrusion: 107, Cutting lenght mm: 4200, Working hight mm: 95, Vorschub Sägewagen : 100, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 400, Säge verstellbar über Steuerung: yes, Number of clamping tools: 9, Main motor kW: 13,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :2008
– German production, instruction manual – year of manufacture 2008 – automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 800 mm cutting height max. 130 mm feed smoothly adjustable up to 80 m/min main engine power 11 kW disc diameter max. /Min. 600 mm / 400 mm possibility to program 100 dimensions line laser two-stage blade feed touch panel control connection diameter 2 x 160 mm machine dimensions (L/W/H) 620 / 160 / 220 cm weight 2250 kg
1 Gebr. Multiple cross-cut saws with 2 sawing units for trimmed goods max. board length: 6.80 m min. cutting length: 1.68 m max. cutting length: : 5.68 m Saw blade diameter: 500 mm max. cutting height: approx. 140 mm Dimensions: 7.20 x 2.20 x 1.50 m Weight: approx. 700 kg Electrical length adjustment via display Sawing units are driven by chain We would be happy to send you a video
PANHANS ECOPAN Working area 3200x3200 Saw with undercutter, 3 tables with air cushion Full technical documentation Cutting optimization program Opal First owner, machine in continuous operation very little used, ... more information