| Description: |
Frame presses S&S RP 2000
used machine
Working width: 4000 mm
Working height: 2600 mm
Number of
cylinders: 6 St.
Dimensions (L/W/H): 5300 x 1250 x 3330 mm
S&S
frame press type RP 2000,
-----------------------------
C E -
version
Stable frame welded construction made of thick-walled
special hollow profiles,
Sliding carriage and pressure bar with 50
mm hole pattern.
Continuous abutment on the left for width
compression, lower abutment
in two levels.
Vertical press
cylinder on special pressure bar with one-hand quick
adjustment
with weight compensation in the 50 mm hole pattern,
height-adjustable, long
Sliding carriages ensure the
permanent
absorption of high pressing forces.
Fast, smooth width adjustment
with ball-bearing carriage
Central locking, fixation in 50 mm hole
pattern.
Upper horizontal press cylinder infinitely adjustable in
height and with
Equipped with counterbalance.
Lower horizontal
press cylinder with center holes for the two
Abutment levels, with
weight compensation.
Abutment and pressure plate depth 100
mm
Printing plate and support width 130 mm
Machine
electro-hydraulically controlled, with 2 vertical pressure cylinders d
=
50 mm, stroke 120 mm double-acting, with counterweight
and
One-hand quick adjustment, 2 pieces
Horizontal pressure
cylinders d = 40 mm, stroke 120 mm double-acting, with
weight
balancing, 2 manual control valves,
Pressure gauge, 1 pressure
control valve from 20 to 125 bar corresponds to 400
to 2400
kg
pressure
vertical, with 3 kW three-phase motor for 400
volts, 50 Hz operating voltage.
Complete with electrical
connection.
Paint finish: RAL 7035 light gray with RAL 7016
anthracite grey
Working size: 4000mm x 2600mm (length x
height)
Required space: 5300 x 1250 x 3330 mm (L x W x
H)
Machine including the following
options:
--------------------------------------
Article
00000374 1.00 pc
Medium pressure bar with pressure
cylinder
double-acting, weight compensation,
pressure hose and
shut-off valve
up to 2600 mm high
Article 00000047 1.00
pc
Individual pressure control for medium pressure
bar,
Pressure control range up to max. 100 bar
(for pressing
crossbar windows)
Article 00000038 1.00 pc
Cross printing
device complete with pressure cylinder
double-acting, weight
compensation, pressure hose
and shut-off valve
There is no
weight compensation on the lower horizontal cylinder
Article
00000048 1.00 pc
Individual pressure control for transverse
pressure device,
Pressure control range up to max. 100
bar
(for pressing crossbar windows)
Article 00000039 1.00
pc
Shut-off valve on the 3rd vertical cylinder
Article
00000039 1.00 pc
Shut-off valve on the upper horizontal
cylinder
Article 00000050 1.00 pc
Width allowance for
compression
of small frames to bridge the
1st pressure beam,
G1212123 including shut-off valve on the 1st vertical
cylinder
Article 00003117 1.00 pc
Basic equipment for
counter profiles
The space required in height increases by 100
mm
Item 00099000
All pressure plates and
abutments
covered with plastic
Article 00000049 1.00
pc
Triangle studio window pressing device
consisting of:
locking device of
Vertical pressure bar and 3 attachable,
side-guided pendulum pressure plates
Article 00000063 1.00
pc
double pendulum pressure plate
for pointed windows
(triangle)
--------------------------------------
To
tal price in the above version ex works: On
request!
--------------------------------------
Options:<
br/>Article 00000042 1.00 pc
Machine that can be
dismantled
i.e. H. Pressure bar on
pallet
--------------------------------------
Further
options such as other working dimensions on
request!
(Technical information according to the manufacturer
- without guarantee!
Illustrations may be dated
Deviate from
the original, prices net, plus VAT
(domestic))
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-6792
|