| Description: |
Beam machines Hundegger K3i-5-Achs 900mm
used machine
Used cutting machine Hundegger K2 machining width 1250mm
Manufacturer: Hundegger, DE
Type: K2i - 5 1250mm
Built: 2009
Condition: used, in operation, very good
Consisting of:
1. Fully automatic wood conveying with feed roller conveyor and feed
and feeding cross conveyor
Consisting of a roller conveyor with cross-over from the cross
conveyor with 5 strands equipped with hinge tape chains, which ensure
injury-free transport
Length: 9.2 m, Width: 2.2 m
2. Lower table swivel crosscut saw with 4-axis control
With a carbide saw blade of 900 mm (11.0 KW)
max. saw cutting depth: 300mm at 90° infinitely adjustable machining
stroke
with positioning drive pivotable 0- 360°, inclination 0-65°, drive
servo-hydraulic,
With this aggregate, all saw cuts, such as angles and shitging
sections, longitudinal sections for burring and lruning, hewing or
stash sections) are executed.
Thanks to the 4-axis control, witch cuts and extreme are possible.
Any remaining items will be pushed forward by the automatic
deporter.
3. Universal milling unit 5 -axis
This unit can be used in many ways on all sides of the component.
Machining such as tanner and hoe leaf, first leaf, cones, sheetlets,
pin holes, join milling mills can be produced precisely and
economically. Together with the lower table swivel crosscut saw, this
unit forms the heart of the cutting system.
Equipped with tools: insert cutter head of 350 x 100 mm, finger cutter
with 40 x 160 mm, dovetail cutter
4. Swivel longitudinal and cross-groove milling,
With the pivoting longitudinal and cross groove milling machine (0 -
180°), control board and longitudinal grooves can be produced fully
automatically at any angle.
5. Finger cutter on top, horizontal from above, can be used at the
rear, can be fitted with finger or swallowtail cutter
With the FF-top, components can be machined on the BT page 1.
According to the diameter and length of the built-in finger cutter,
all machining operations such as sheeting, pin holes, bores,
longitudinal milling, as well as control board grooves are
possible.
6. Combination support for horizontally working tools with a servo
drive, permeable perimitably to linear guides. Tool slides can be
equipped with a maximum of 3 units such as drilling, slot, or milling
tools
7. 1x drilling rig (kW) – drilling direction horizontal drill
length: mm, max. machining depth mm
8. 1x chain slot unit guided, horizontally from behind over the entire
S1251982 component width or concealed slots
When slitting, the sword is fixed fully automatically on the
operator's side and the wood is continuously processed in the
longitudinal direction, thereby minimizing the processing time. Even
concealed slots as well as the function of the piercing are possible
as before.
9. Combination support for vertically working tools with a servo
drive, can be cross-routed on linear guides and up to 5 vertically
working, hub-controlled tool slides
10. 2x drilling rig drilling direction vertically from below
11. 2x Finger cutter Vertical
12. Marking device from below, with a temperature and
moisture-independent colour pencil, which pneumatically actuated,
executes exact cracks
13. Fully automatic beam turning station - hydraulic
14. Transport and positioning device "Two-hand system" clamping and
guide wagon sands with one servo motor each
15. Electronic control with operator put, a dustproof color graphics
screen, keyboard mouse, label printer
16. Documentation Schlatplan, User Manual
seller offer No. resale 152060304
|