| NC swivel rotary table |
Table surface 800 x 650 (Ø 650) mm |
|
Centre bore 50h6 mm |
|
Maximum load (table centre) 600 Kg |
|
Slot width 14 mm |
| Direct measuring system |
Direct path measuring system |
|
5. Axes (swivelling range) +/- 120 degree |
|
4. Axes (swivelling range) 360 x 0,001 degree |
| Cabine |
Full protection cabin |
| Spindle taper HSK-A 63 |
Spindle taper for HSK-A 63 to DIN 69893 (incl.
adaptation working spindle and standard magazine) |
| 3D quickSET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only
together with option measuring probe) |
| Infrared measuring probe Renishaw |
Infrared measuring probe Type Renishaw OMP 60 SK
40 or optionally chosen spindle taper |
| Tool measuring in machining area Blum
Laser |
Tool measuring in machining area Blum Laser
DIGILOG Tool length and diameter measurement vertically |
| Production package 40 bar/23 l/min, 600 l
tank |
Production package: Scraper flight conveyor with
coolant unit 600 l / 160 gallon, paper band filter Discharge height:
950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant D1252871
supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre
(AD) Exter |
| Coolant tempering |
Coolant tempering for internal coolant unit 600
lt / 160 gallon: Increased tank 980 lt / 259 gallon Heating capacity
max.: 3,000 W / 4 hp Cooling capacity max.: 3,800 W / 5.1 hp |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Oil and emulsion mist separator |
Oil and emulsion mist separator Mechanical filter
Throughput volume 1,100 m³/h |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/ surface/ speed |
| Safety package for power failure |
Safety package for power failure: Voltage control
with fast deceleration trigger Controlled shut down of the control
Display of last executed program number |
| 3D data model |
3D data model in STEP format for integration in a
CAD system by the customer. It is used for machine simulation. (Data
basis in component structure) |
| The machine is delivered with standard
accuracy in accordance with the DECKEL MAHO test report |
The machine will be delivered in Standard accuracy
according to DECKEL MAHO Test protocol. Positional uncertainty
Pmax=0.012mm Cooled feed drives, cooled ball screws, additional
Cooling unit and coolant temperature control remain in the
machine. |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |