| Swivel Rotary Table,
simultaneous |
Swivel Rotary Table for simultaneous
machining swivel range -5 to +110°, rotary axis 360° including
direct measuring system for B- and C-axis and working plane
transformation Not available with NC-Divider EA 410! |
|
Table surface 630 x 500 mm |
|
Distance between T-Slots 63 mm |
|
Number of Slots 7 |
|
Slot width 14 mm |
|
Maximum load (table centre) 300 Kg |
|
Centre bore 30H6 mm |
| Spindle speed 18.000 rpm HSK-A63 |
Spindle speed 20 - 18,000 rpm HSK-A63 for tool
taper according to DIN 69893 power: 35/25 kW // 46.93/33.52 hp
(40/100%DC) torque: 130/87 Nm // 95.88/64.16 ft lbs (40/100%DC)
(differently from standard) |
| Tool magazine 60 po HSK-A63 vertical |
Tool magazine 60 places HSK-A63 vertical chain
with double gripper incl. set up station for tool loading |
| Preparation 3D Quickset |
Machine preparation for use of the 3D quickSET
Toolkit. included is the Softwareoption for 3D quickSET for one
machine. 5 axis machine configurations (only with option touch
probe) |
| Measuring kit Renishaw |
Measuring kit Renishaw touch probe PP40 optical
with tool taper TS27R contact tool setting probe for tool length and
tool diameter measurement |
| Internal coolant supply 40bar/600l |
Internal coolant supply (ICS) with paper
type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160
gallon incl. cabin roof,rotary joint inspindle, rotating clear-view
window (not available with option 2nd cabin door) |
| Swarf conveyor |
Swarf conveyor, scraper type |
| Oil- and Dust extractor |
Oil- and emulsion mist separator mechanical (only
available with cabin roof) |
| Coolant-air blast change-over |
Coolant - Air-blast changeover external switchable
via M-Function |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
|
|
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
RMS-Sensor |