| Main drive |
Drive power (100% DC) 6 kW |
|
Drive power (40% DC) 8,5 kW |
|
Torque (100% DC) 41 Nm |
|
Spindle taper BT 30 |
|
Speed range 20 - 15000 rpm |
|
Torque (40% DC) 48 Nm |
|
Clamping System ISO 7388-3 - JD30 |
| Toolchanger |
toolchanger |
|
Type of magazine Disk |
|
Number of tools 25 |
| Integrated swivel rotary table
simultaneous |
Integated swivel rotary table 5-Axis simultaneous
mode! Torque drives incl. direct measuring in A- and C-Axis Swivel
range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table
diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software
package |
| Production package band filter ICS
40bar |
Paper band filter ICS 40bar includes: Paper band
filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for
fine chips (self cleaning slotted filter) Discharge height: 600mm;
Tank volume 200l Flushing in working room Spray gun for swarf
removal |
| Chip Trolley DMP, tiltable |
Chip Trolley DMP, tiltable suitable for Chip
removal package with chip conveyor and Production package |
| Air blast through spindle centre |
Air blast through spindle center via M-Command;
maintained air with small Oil portion Due to needed lead through in
main spindle only with swarf removal package ICS possible! |
| Blum Efficiency package |
Blum Efficiency package suitable to milling
spindle including: Touchprobe TC-52 Infrared Z-Nano cable connected,
probe head mechanical for tool break control and length measuring
Calibration bar with tool taper Messzyklen |
| 3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
| MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick shutdown |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| Standard Automation Interface right |
Automation interface right according to DECKEL
MAHO Standard consisting of: Interface (Profibus) via M65; Automatic
loading door right; Working table with 4-channel rotary joint;
4-chanel enegry supply to machine table for (3-Axis-Machines) |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| DXF Reader |
DXF-Raeder: Open CAD files Extracting of counters
and drilling positions directly in G-code and ShopMill programs
Supported elements: drilling positions and contours |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/surface/speed |
| Exhibition design DMP 70 |
Exhibition design chiller of electrical cabinet
painted in electrical cabinet color; DMG-MORI set of labels; paper
version of electrical plan |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| DMG MORI Service Agent |
DMG MORI Service Agent Warning in advance -
Service on time |
|
|
| Workpiece loading & unloading system WH 3
CELL |
Workpiece loading & unloading system WH 3 CELL
with 6-axis industrial robots and workpiece carrier storing system
(paternoster); maximum possible workpiece weight of 3 kg, maximum
workpiece size 100 x 100 x D1252871 50 mm Robot FANUC LR Mate 200
iD/7L PROFIBUS in |
| Pneumatic pallet pusher - robot side |
Pneumatic cylinder installed on the robot side for
slide over individual workpiece pallets within the paternoster
system. |
| Menu-driven input programming |
Menu-driven input programming Control extension in
addition to the Teach programming; Process definition by entering
parameters; Separate intuitive user interface; |
| WH 3 CELL Integration kit for DMP
35/70 |
WH 3 CELL Integration kit for DMP 35/70
Machine-specific adaptation for the protective housing on one DMP
35/70 |
| Dual gripper PGN 80 (without gripper
fingers) |
Dual gripper Type Schunk PGN 80 with 8 mm travel
per jaw (gripper fingers not included!) |
| Gripper adjustment system for 2
gripper |
Gripper adjustment system for dual gripper |
| Workpiece carrier standard |
Workpiece carrier standard - plastic 15 Workpiece
carrier 600x400 (workpiece specified inlay´s not include) |
| Robot Teachset |
Robot Teachset for the new creation of workpieces
/ workpiece carriers as well as for the basic adjustment of the
robot and / or gripper. |
| SPC drawer |
SPC drawer (only to be removed) Output of a trial
workpiece for process control |
| Turning station (without gripper
fingers) |
Turning station includes 1 gripper, type depending
on the selection and rotary module 0° / 180° (gripper fingers not
included!) |
| Not OK discharge via slide |
Not OK discharge via slide Removal of bad parts
after machine signal |
| Alignment station |
Alignment station for exact positioning of the
workpiece in the gripper. |
| Robot Teachset |
Robot Teachset for the new creation of workpieces
/ workpiece carriers as well as for the basic adjustment of the robot
and / or gripper. |
| Special equipment |
Exhibition design for WH 3 CELL, incl. enclosure
cooler painted in enclosure colour, robot painted in painted in
calcite white, DMG MORI sign set, Illumination of robot work area,
Makrolon panes around Robot work area instead of Mesh panels incl.
door Add |
| Special equipment |
- 2 sets of gripper fingers designed for the
DEMO workpiece standard gripper fingers - 3 sets of workpiece-specific
inlays |