NC mill-turn table with
pallet |
NC mill-turn table with pallet number of
T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 /
0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning
operation: 800 rpm integrated balancing sensor Pallet changer for 2
pallets |
|
Type of Measuring system Direct measuring
system |
|
Table surface Ø 800 x 630 mm |
|
Centre bore 50 mm |
|
Maximum load (table centre) 1400 Kg |
|
4. Axes (swivelling range) 360 x 0,001 degree |
Clamping hydraulics M/T |
Clamping hydraulics for mill-turn table and setup
station for hydraulic clamping devices / chucks incl. pallet
preparation basic machine |
Chip removal |
2 worm conveyors in the machine bed convey into a
cross conveyor (jointed-band conveyor) with interval control (suitable
for long-chipping material). discharge height: 950 mm / 37.4 in |
Univ. milling head w. controlled B-axis
HSK-A 100 |
Universal milling head with controlled B-axis
HSK-A 100 (only with motor spindle HSK-A 100) |
Motor spindle, 12,000 rpm, 288 Nm |
Motor spindle powerMASTER HSK-A100 Spindle speed
20 - 12,000 min-1 Output 44 kW / 32 kW (59 hp / 43 hp) Torque 288 Nm /
187 Nm (212 ft lbs / 137 ft lbs) (40 / 100 % duty cycle) Wheel
magazine HSK-A 100 |
Taper cleaning brushes |
Taper cleaning unit with rotating brushes for
spindle taper HSK |
Stop block + 3-point-support |
Stop block + 3-point-support Design according to
DECKEL MAHO Standard |
Tool magazine, wheel, 123 pockets HSK-A
100 |
Tool magazine wheel magazine (2 wheels) with 123
tool pockets HSK-A 100 |
Operation panel for loading station tool
magazine |
Control panel for loading station tool magazine
with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise
LTSB - 64 bit |
Infrared measuring probe Renishaw HSK-A
100 |
Infrared measuring probe Type Renishaw PP60
optical (OMP 60) HSK-A 100 |
Tool measuring in machining area Blum
Laser FD |
Tool measuring in machining area Blum Laser
DIGILOG Automatic retraction of measuring device in a protective
housing, Laser-system for milling tools, 3D touch-probe for turning
tools |
Tool breakage control mechanical |
Tool breakage control mechanical version |
MPC - Machine Protection Control |
MPC - Machine Protection Control Machine
protection by quick shutdown |
SGS Spindle Growth Sensor |
SGS Spindle Growth Sensor Compensation of the
axial displacement motor spindle by integrated spindle-growth
sensor. |
The machine is delivered with standard
accuracy in accordance with the DECKEL MAHO test report |
The machine will be delivered in Standard accuracy
according to D1252871 DECKEL MAHO Test protocol. Positional
uncertainty Pmax=0.012mm Cooled feed drives, cooled ball screws,
additional Cooling unit and coolant temperature control remain in the
machine. |
rotoLENS - milling head camera |
rotoLENS - Camera with rotating lens integrated in
the milling head Visualization via CELOS and HDMI Digital zoom and
recording function |
proTIME |
proTIME Visualisation of the remaining runtime,
remaining workpieces and the machine state |
Grinding package |
Grinding package - upgrade motor spindle with
accoustic emission sensor - static dressing unit - coolant unit 1,300
l/ 343 gal with centrifuge - machine protection for grinding
operations - grinding and dressing cycles |
Control cabinet lighting with power
outlet |
Control cabinet lighting with power outlet
Lighting in the control cabinet with motion sensor power outlet 230V -
10A (Type F - Schuko) Other types of outlet on request Connected
before the main switch (for this the customer must provide a loadable
neutra |
Safety package for power failure |
Safety package for power failure: Voltage control
with fast deceleration trigger Controlled shut down of the control
Display of last executed program number |
IoTconnector |
IoTconnector The IoTconnector allows the use of
online services of DMG MORI (e.g. NETservice) |
Machine Data Connector |
Machine Data Connector (MDC) Uniform machine data
interface. |
NETservice |
NETservice Qualified support by Internet-based
remote diagnostics |
Messenger V4 |
Messenger V4 Clear presentation of the machine
live status. |
Service Agent |
Service Agent Overview of all maintenance work on
the machine |
Special equipment |
L- probe package // extendable calibration unit
TCC Complete TCC Advanced Note: In combination with the grinding
package and TCC the spindle does not have a structure-borne sound
sensor. Power consumption is used here is used here. |