| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| Package Mill / Turn HSK-A 63 |
Package Milling / Turning: Upgrade NC-swivel
rotary table to Milling - Turning / direct drive Pallet C-axis d 630
mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor Motor
spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 35 kW
/ |
| Tool magazine, chain vert., 60
pockets |
Tool magazine Vertical chain magazine basic with
60 magazine pockets SK 40 or optionally chosen spindle taper |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| Infrared measuring probe Renishaw |
Infrared measuring probe Type Renishaw OMP 60 SK
40 or optionally chosen spindle taper |
| Tool measuring in machining area Blum
Laser FD |
Tool measuring in machining area Blum Laser
DIGILOG Laser-system for milling tools, 3D touch-probe for turning
tools |
| Tool breakage control mechanical |
Tool breakage control mechanical version |
| VCS Complete extension package |
VCS Complete extension package for each further
machine: software / password (only in conjunction with option
measuring probe or existing set of measuring tools) |
| TCC Tool Control Center basic
HSK-A63 |
TCC Tool Control Center basic HSK-A63 - Detection
of soiling at the D1252871 tool interface - Spindle protection by
monitoring the max. forces - Determination of the tool pull-in
force |
| Production package 40 bar/23 l/min, 600 l
tank MT |
Production package (M / T): belt chip conveyor
with coolant unit 600 l / 160 gallon, paper band filter Discharge
height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant
supply 40 bar / 23 l/min - 580 psi / 6 gpm through spindle centre (AD)
Exter |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Interface for Oil and emulsion mist
separator |
Interface mechanical and elektrical for oil- and
emulsion mist separator |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| DMG MORI NETSERVICE |
DMG MORI NETSERVICE Qualified support by
Internet-based remote diagnostics |
| IoT connector |
DMG MORI IoTconnector The IoTconnector allows the
use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on
ADAMOS) |
| SERVICE AGENT (CELOS) |
SERVICE AGENT (CELOS) Overview of all maintenance
work on the machine |
| MESSENGER (CELOS) |
MESENGER (CELOS) Clear live status of the
networked machines |