| Automatic swivel milling
head |
Universal head: automatic changeover from
vertical to horizontal machining |
| Prod. package 40 bar/23 l/min |
Coolant through spindle centre form AD 40 bar/23
l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view
rotating window Multi-jet unit at universal head, switchable from
coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets)
pump |
| NC rotary table with pallet changer |
Type of Measuring system Direct measuring
system |
| Cabine |
Full protection cabin |
|
4. Axes (swivelling range) 360 x 0,001 degree |
|
Rotation speed max.4. Axis 30 rpm |
|
Distance between T-Slots 100 mm |
|
Number of Slots 7 |
|
Slot width 18 mm |
|
Maximum load (table centre) 1500 Kg |
|
Centre bore 50H6 mm |
|
Table surface 1000 x 800 mm |
| Integrated motor spindle, 12,000 rpm |
Integrated motor spindle SK 50, 12,000 rpm |
|
Drive power (100% DC) 32 kW |
|
Type of main drive Integrated motor spindle |
| Tool magazine,chain,120 pockets |
Tool magazine chain magazine with 120 magazine
pockets |
|
Spindle taper HSK-A 100 |
|
Speed range -12.000 rpm |
|
Torque (40% DC) 288 Nm |
|
Torque (100% DC) 187 Nm |
|
Drive power (40% DC) 44 D1252871 kW |
| Spindle taper HSK-A 100 |
Spindle taper for HSK-A 100 to DIN 69893 (incl.
taper cleaning, adaptation working spindle, tool changer and tool
magazine) |
| Infrared measuring probe Heidenhain |
Infrared measuring probe Heidenhain TS 640 The
measuring probe is changed out of the tool magazine automatically into
the working spindle |
| Tool measuring in machining area Blum
Laser NT-Hybrid |
Tool measuring in machining area Type Blum Laser
NT-Hybrid automatic retraction of the measuring unit in a protected
housing tool length and tool diameter measuring in horizontal/vertical
position |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| 2 pressure steps for internal coolant
supply |
2 Druckstufen für IKZ-Kühlmittelanlage 40 bar/23
l/min, 80 bar/15 l/min (theoretische Pumpenleistung) anwählbar über
NC-Programm |
| Oil and emulsion mist separator |
Oil and emulsion mist separator electrostat
filter |
| MCIS-TDI Tool management |
MCIS-TDI Tool management, Determination of tool
usage |
| Spray pistol with pump |
Spray pistol with pump 1 bar/40 l/min 14.5
psi/10.4 gallon/min (theoretical pump performance) |
| Cooling by air blast |
Cooling by air blast through spindle centre,
selection with M function |
| Special equipment |
- Feed drives X-/Y-/Z-axis with liquid cooling -
Additional air conditioner with 3 kW, placed separately beside the
machine. |