Specifications / Technical Data S-720/T
CNC-Fraesmaschine und
Graviermaschine / Fraese
With the T-variant of the
High-Z CNC Fraes.-and engraving machine you acquire old-fashioned
technology with the certain i-Tpuelchen in TUeV-certified quality
(EMC). The High-Z/T CNC-Fraese is designed for even more accuracy
(repeatability about 0.01mm ) and especially for higher travel
speeds.
The high-Z/T CNC-Fraese achieves fantastic
accuracy and an almost unmeasurable reverse play of about 0.01mm due
to the ball's circulation spindles. At the same time, high travel
speeds of up to 108mm/second ( 6500mm/ minute) can be achieved.
This allows engraving and feeding speeds of up to approx.
4500mm/min and express ingesses up to approx. 7000mm/min.
Here you can watch a video of empty journeys with the
new High-Z/T.
This series of mechanical engineering
is just as applicable in the industrial sector for work such as
engraving, framing, drilling, measuring, cutting, as well as for
dosing systems to apply adhesive sizing, etc. on 3D contours,
coloured energy chains on all axes.
Furthermore, all machines are protected with a double-secured
emergency exit button. Another is located directly at the
controller.
basic
equipment of all high-Z CNC fraesmachines:
software
ConstruCAM-3D, (from S-720 or S-400/T ) including
no-use reference switches and NOTAUS buttons as well as
22mm thick linear guides and individually adapted spindle nuts.
---------------------------------------------------------
-----------------------
equipment /
Product data:
oDrive: 4 powerful brand stepper
motors from Nanotec with 1600 steps/ revolution (control 1/8 step)
o2 motors ! for consistent pull and pressure forces when
framing on the X-axis (no stoering belt)
o pushing through
long materials possible, since C5344965 no belt drive is in C5344965
the way at the end of the X axis !
o Z-axis 16mm, all ground
and 61hrc top-flit-in
o-two-sided ball-bearing ball-bearing
spindles on X and Y axles
otravel speed max. 7000 mm/min
oTechnical resolution 0.00625 mm ( 1/8 step )
oreverse play maximum approx. +/- 10 microns ( 0.01mm )
o clamping area 1050 x 520 mm
oTravel distances: X=720
mm; Y=400 mm; Z= 110 mm
oContactless reed sensors / reference
switches / limit switches on all axes
oDouble secured
emergency
oEnergy chains for clean cable guide
oTotal mass with motors : L x W x H=ca.1070 x 690 x 500mm
oFraesmotor holder Euroneck 43mm
the ce-compliant commissioning of our CNC machines requires
the installation of the protective enclosure and the suction
nozzle.
seller offer No. resale 67805432
Germany
