Specifications / Technical Data S-720
CNC-Router /
CNC-Engraver / Milling machine
With the High-Z cnc router and engraving machine you purchase an
allround talent. If you want to clampand fix complex workpieces on the
worksurface, or, or, or clamp work-pieces in a high bench vise (the
cnc milling machine sits on a frame-construction, is driven by 2
motors and therefore allows to be positioned above a piece to be
processed).
Or if you simply want to
do engraving- or drillingjobs.you can work on a flat surface, with a
pieces of sheet MDF fixed to it. Plane it once and you will be able to
work with a precision of +-0,02 mm depth.
All cnc routers / milling machines are being
delivered with black energy-chains on all axis, which allows a better
cabling management. Also, all cnc milling machines are equipped with
an emergency stop button. An additional emergency stop you find in
front of the controller.
Basic
equipment of all High-Z CNC-milling and engraving machines / routers:
Software ConstruCAM-3D ( from S-720 and S-400/T )
included
Contact free reference switch and
emergency stop button as well as 22mm thick linear guide ways and
individually adapted screw nuts
------------------------------------------------------------------
--------------
Equipment /
Productdetails:
oDrive : 4 stepping
motor by Nanotec with 1600 steps/rev (1/8 Step)
o2 motors for
constant tension and compression during milling operation on X-Axis
oFeed through of long workpieces possible, because there's no belt
drive at the end of the X-axle
oGuide ways X and Y axle 22 mm
/ Z Axis 16mm, grinded and with 61hrc hardened surface
oBall
bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead
oTraverse speed of rapid feed: max. 2500 mm/min
oTechnical
resolution: 0,00187 mm ( 1/8 Schritt )
oReversal error max.: +/-
30µm ( 0,03mm )
oTable size / clamping area: 1050 x 520 mm
oTraverse Paths: X=720 mm; Y=420 mm; Z= 110 mm
oReference- and
limit switch on all axes
oDouble safety emergency stop button
oEnergy chain for clean cabling
oTotal dinemsions incl motors:
L x W x H = appr. 1070 x 690 x 500mm
oMilling Motor anchorage:
Euroneck Ø43mm
oincl. Software PC-NC or WIN PCNC Light
oincl. Software ConstruCAM-3D ( recommended sell price 1902.81
EUR)
oModular frame for universal application
oWeight
appr. 41 kg
oComplete machine Includet 4 driver microstep
controller 4x 2,1 Ampere
oAn approx. 30-minute long
introduction during pick up and an unlimted telephone support are
included.
oAn approx. 2-3 hours long introduction and an
installation of software on your brought note book/ PC as well as a
explanation of C5344965 fundamental terms of Corel Draw etc.
possible, too.
------------------------------------------------------------------
--------------
Technical data of included
microstep controller:
o4-channel control
oPower up to 4 x 2.4 A
oMicro
pacing 1/8-Step / 1600 steps / rev.
o4 ports for 4 stepper
motors
oConnection to parallel port or in WIN PCNC Economy to
USB port
o"Sleep function" for power reduction in
standby
oProtect against high voltage spikes
oE-stop
button, 2-way secured
oControl of 2 power-consumers up to
1200 watts via software switchable (from WIN PCNC Economy), 230 V,
8A
oPower Supply Relay / Cooling
oAluminum heatsink
/ 2 active fans 60 & 40mm
oAbility to connect a total of 5
end-and reference switches / stop button
oPorts motors and
control line through D-sub 9-pin.
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse
Jyrsintae fraisage machin Freesmachine Frezesanas masina frezavimo
masinos ? Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New
ready for operation
Germany
