Item condition: New. Machine is delivered pre-assembled and tested.
Specifications / Technical Data S-720
CNC-Fraesmaschine
Engravings of all kinds, even on glass, VHM, carbide and
up to 62 RC hard steel !
With the High-Z CNC-Fraes.-
and Engraving Machine they acquire an all-round talent. Whether you
want to clamp complex parts on a groove table or, or to clamp factory
tins into a high vice (the machine is on a frame construction, is
driven in X via 2 motors and thus allows to be placed completely over
a part to be machined).
or simply want to do
engraving or drilling then they simply work on a flat base, on which
they then attach e.g. an MDF plate, which they once overfrave plan and
are then able to work up to approx. +-0.02mm exactly in depth.
All machines are supplied with coloured energy
chains on all axes due to improved cable guidance. Furthermore, all
machines are protected with a double-secured emergency exit button.
Another is located directly at the controller.
basic equipment of all high-Z
CNC fraes machines:
software ConstruCAM-3D ( from
S-720 and S-400/T ) including
Equipment
/ Product data:
oDrive : 4
powerful brand stepper motors with 1600 steps/ revolution (control 1/8
step)
o2 motors ! for consistent tension and pressure strains
when fraesing on the X-axis (no stoering belt)
opushing long
materials possible, since no belt drive is in the way at the end of
the X axis !
oFuehrungen X and Y axis 22mm ! Z-axis 16mm, all
ground and 61hrc top-flax-hared
oOn-side ball-bearing
trapezoidal threaded spindles Tr.12x3 mm incline, nuts adapted to
spindles in a manner
oTravel speed max. 2500 mm/min
oTechnical winding 0.000187 mm ( 1/8 step)
reverse
play maximum. +/- 30 microns ( 0.03mm )
o clamping area 1050
x 520 mm
otravel distances: X=720 mm; Y=420 mm; Z= 110 mm
oContactless reed sensors / reference switches / limit
switches on all axes
oDouble secured emergency scanner
oColored energy chains for clean cable
oTotal mass
with motors : L x W x H=ca.1070 x 690 x 500mm
oFraesmotor
holder Euroneck 43mm
oinkl. Software PC-NC or WIN PCNC
Light
oinkl. Software ConstruCAM-3D (recommended unit price
1902.81 Euro )
oOpen frame, thus universally applicable
oWeight approx. 41 kg
oComplete machine incl. 4
channel control 4x 2.1 Ampere
oA briefing on pick-up and
unlimited telephone support for service life are included in the
price.
oA 2-3-hour C5344965 briefing with installation of
C5344965 the software on your brought computer as well as a
declaration of the most important basic concepts for Corel Draw etc.
is also possible
.
Technical data for the control included in
the price:
o4 channel
control
oStrom up to a maximum of 4 x 2.4A
oMicrostep control 1/8-step / 1600 steps/umdr.
o 4
Connection for 4 stepper motors
oconnection to parallel port
or via WIN PCNC Economy USB to USB port
oSleep function for
power reduction in standby
oprotection against high
overvoltage peaks
oNotaus button, 2-fold secured
o
control of 2 end-users up to approx. 1200 watts can be switched via
software (from WIN PCNC Economy ), 230 volts, 8A
opower
supply relay / cooling
oAlu Kuehlkoerper / 2 active Luefter
60&40mm
oConnection possibility of a total of 5 end or
reference switches / emergency exits
oAnschluesse motors and
control line via D-Sub 9-pol.
•p>
the ce-compliant commissioning of our CNC machines requires
the installation of the protective enclosure and the suction
nozzle.
seller offer No. resale 67805438
Germany
47608 Geldern
