Blister machine for the blister pack in PVC / ALU and PVDC / ALU with
mechanical transfer of the forming material by means of clips of
intermittent complete movement of: Support for the foil of the forming
material. Digital thermoregulators at controlled limits. Preheating
station with easily replaceable plates treated non-stick. Formation
station with "rotary" movement Welding station with "rotary" movement
Limiter of the cooling water circuit when the machine is stopped.
Sealing material foil holder Internal diameter 70-76 mm External
diameter maximum 300 mm. Transfer system from the blister of the
cutting die to the blister magazine. Motorization with self-locking
three-phase motor with variable speed through inverter. Vacuum pump
dry air pressure and air control Protection in plexiglas with safety
microswitches. Controls of minimum level foils sealing and formation
materials, with a pre - alarm signal on the panel Power supply:
Voltage I5353093 and frequency 50 Hz - 380 V Display status machine
Remote control push button Maximum width of forming material: 256 mm
Maximum depth of forming: 12 mm Mechanical speed: from 25 to 50
cycles / minute Maximum index: 156 mm Consumption: Maximum power
installed: 11 KvA Water for cooling: 0.7 / h at a pressure of 1-2 Bar
Compressed air: 500 L / mn with a pressure of 6-7 bar Automatic
Feeding for the capsules